Outdoor Lithium Battery Enclosure-Edge Span B200
Maintenance Free IP65 LiFePO4 Lithium Battery System
Edge Span B200 Outdoor Solar Battery Enclosure connects to Edgeware’s all in one outdoor enclosure such as Edge Span U1000/U200/U60/S60. Equipped with an expanded large-capacity LiFePO4 lithium battery for scenarios with particularly high requirements for outdoor solution system autonomy.
Edge Span B200 Outdoor Battery Enclosure is a battery system specially designed by Edgeware for outdoor power systems. Solar energy systems are often built in remote areas, so Edgeware believes that the battery system that cooperates with the remote solar power system must have the following characteristics to save OPEX to the greatest extent:
(1) Maintenance Free
Remote solar power systems are generally deployed in remote areas, where the cost of on-site maintenance and troubleshooting is high, so system maintenance free is required to save OPEX to the greatest extent.
(2) Natural Heat Dissipation
The normal outdoor solar cabinet system uses fans to dissipate heat. However, mechanical parts such as fans will most likely have problems within 2-3 years and require on-site maintenance and replacement. Therefore, we recommend that the system adopt natural heat dissipation, so as to avoid on-site maintenance due to fans.
(3) IP65/NEMA4 Ingress Protection
The complex environment of outdoor deployment, sand dust, salt spray, high humidity and other challenges will affect the long-term stability of the system. So we think the system should reach IP65/NEMA4X level ingress protection. Although there will be additional costs for this protection, in the long run, OPEX will be saved by running it all year round.
(4) Long Life Cycle
Choosing long-life batteries can avoid replacing the battery at the station to the greatest extent. It is recommended that the charge and discharge cycles of the battery cell should reach 3000 times or more.
(5) Light and Flexible for Easy Installation
The system should be small and light, easy to transport and install.
Edge Span B200 Outdoor Battery Enclosure can be installed on a pole or wall. If it is matched with Edgeware’s Edge Span series, it can support back-to-back pole mounting.
According to Edgeware’s usual service method, we can also customize it according to your scenario
Enclosure Basic Specification
Internal Function Units
Lithium Battery from 40AH48V to 60AH48V
LiFePO4 Lithium Battery
Default 48V50AH LiFePO4 Lithium Battery, can be customized.
Rated DC48V, Range DC52.5V-42V
Operating Temperature (Charging)
Operating Temperature (Discharge)
Standard charge current
Standard charge voltage
Standard discharge current
Maximum discharge current
50A ( 3 Seconds)
Discharge cut-off voltage
Battery Cell Specification
Basic Battery Cell
Standard Charge Current
Standard Charge Voltage
Maximum Charge Current (Continues)
Input Voltage, Input current
Charge Current, Discharge Current
Battery Operating Status
Edgeware Convergence Software Platform