Edge Span S60 LSP-3 All in One Solar Battery Enclosure
500W Solar MPPT, POE Switch and Battery All in One System
1. Edge Span S60-LSP-3 All in One Solar Battery Enclosure Dimension
Edge Span S60-LSP-3 Solar Battery Enclosure Dimension
2. Edge Span S60-LSP-3 Application
Typical Scenario for Edge Span S60 LSP-3 Solar Battery Enclosure
Edge Span S60 LSP-3 solar battery enclosure is a solar power based outdoor maintenance-free all-in-one enclosure that integrates communications, solar power, lightning protection, and POE switch. The product is specially optimized according to the pain points of CCTV Camera and IoT devices outdoor deployment to achieve the following main functions:
- Industrial grade layer2 POE+/POE++ switch(2 Ports 802.3at 30W, 1 Ports 802.3bt 110W)
- Industrial grade 500W MPPT solar controller
- 48V55Ah lithium battery(48-72 hours system autonomy based on different load configuration)
- Software system for remote management and monitoring
- Solar Statistics
- Surge protection design
- Full aluminum IP65 enclosure for whole system natural heat dissipation ability.
3.Edge Span U60 LSP-3 Solar Battery Enclosure Port Configuration
Typical Scenario for Edge Span S60 LSP-3 Solar Battery Enclosure
4.System Main Funciton Units
Edge Span S60 LSP-3 Main Function Units
5.Main Features
5.1 Solar System Remote Monitoring and Managemenet
Edge Span S60 LSP-3 Solar Battery Enclosure Remote Monitoring and Management
When the solar battery enclosure is deployed outdoors, controlling the operating status of the solar controller is very helpful for the operation and maintenance of the entire network. Problems can be diagnosed remotely so that on-site repair and maintenance can be completed faster and better when needed. Edge Span’s built-in solar controller can be remotely monitored and managed by Edgeware’s Convergence software platform, allowing users to easily implement remote operation and maintenance.
5.2 Solar Battery Management System(BMS)
Edge Span S60 LSP-3 Solar Battery Management System
Edge Span S60 solar battery enclosure is usually deployed in remote outdoor areas, and the maintenance cost is relatively high. The battery status and service life will largely cause on-site maintenance and repair. Therefore, the built-in battery of Edge Span is equipped with Battery Management System (BMS). BMS collects key parameters such as battery voltage, current, capacity, number of cycles, etc. and synchronizes them to the software platform for remote management and maintenance by operation and maintenance engineers.
5.3 Environment Monitoring in Solar Battery Enclosure
Edge Span S60 LSP-3 in Enclosure Environment Management
The deployment environment of solar battery enclosure is relatively complex, so Edge Span has built-in temperature and humidity sensors that can synchronize real-time conditions to the software platform.
5.4 POE Remote Reset
Solar Battery Enclosure Remote POE Reset
Edge Span solar battery enclosure has built-in POE remote reset function to help customers remotely restart CCTV Camera or IoT devices. No need to go to the site, just operate on the software platform to restart the corresponding devices.
5.5 Solar Power Generation and Usage Statistics
Solar Statistics on Local UI and Software Platform
The Edge Span S60 solar battery enclosure has a built-in solar statistics algorithm that can implement solar statistics locally on the site and also simultaneously implement solar statistics on the software platform, so that customers can better understand the output and use of solar energy.
5.5 Load Time Schedule Turn On and Off
Solar Battery Enclosure Load Turn On/Off Based on Time Schedule
The Edge Span S60 solar battery enclosure can be turned on or off according to the scheduled time to use energy more efficiently. For example, some loads that do not need to be turned on at night can be turned off first, thus using less battery at night.
5.5 Load Conditional Schedule Turn On and Off
Solar Battery Enclosure Load Conditional Turn On/Off
The Edge Span S60 solar battery enclosure can be turned on or off according to pre-configured condition to use energy more efficiently. For example, when battery is less then 40%， turn off some loads.
6.Edge Span S60 LSP-3 Solar Batteyr Enclosure Specifications
|
Edge Span S60-LSP Solar Battery Enclosure Specification |
|
|
Dimension |
W*H*D 295mm*355mm*214mm |
|
Weight |
24kg(with all system） |
|
Material |
Aluminum |
|
Ingress Protection |
IP65 |
|
Heat Dissipation |
No fan design, natural heat dissipation |
|
System Operating Temperature |
-20~+75°C, 5%~90% RH Non condensing |
|
Solar Controller |
500W DC48V 10A MPPT solar controller with remote control |
|
Battery |
Embedded with 48V55AH Lithium Battery which has 2600Wh Electricity |
|
Network and System Surge Suppression |
Contact discharge 8KV, air discharge 15KV, port lightning protection common-mode 4KV, differential mode 2KV |
|
Network Module: |
GE Downlink: 3*10/100/1000M Base-T ports GE Uplink : (1-2) *10/100/1000M Base-X or Base T port Layer 2 POE switch module manageable or non-manageable Port number can be customized |
|
PoE: |
Downlink ports support 2 Ports 802.3 af/at , 30W Per port 1 Port 802.3 bt 110W. |
|
Output Power |
DC12V DC48 can be customized based on requirement |
|
Output and Input Signal |
DI/DO RS485 can be customized based on requirement |
|
System Monitoring and Management |
Work with Edgeware Convergence software platform to perform system monitoring and management |
|
Environment Monitoring |
System temperature, humidity. Box open and close status |
|
Solar Monitoring and Control |
Solar power generation, usage and battery charge statistics Solar system working status Solar system remote turn on/ off based on time scheduling |
|
Battery Status Monitoring |
Battery voltage , current, remaining capacity, temperature Battery working status, battery charge and discharge current Battery health estimation( Battery life time estimation ) |
|
External Light Control |
External light control t |
|
Typical Application Scenario |
cctv cabinet,solar cabinet, solar termination cabinet, Solar Controller enclosure, video surveillance cabinet, IoT Cabinet, IoT device enclosure, IoT enclosures Smart City, Industrial Control, video surveillance, Telecom |
|
Network Module Switching Capacity |
128Gbps |
|
MAC |
8K |
|
Network Module Protocol Supported |
4K VLAN based on port, IEEE802.1q VLAN based on the protocol, VLAN based on MAC QinQ configuration, Port configuration of Access, Trunk, Hybrid LACP, Static aggregation, Max 3 aggregation groups and 8 ports per group. STP (IEEE802.1d),RSTP (IEEE802.1w),MSTP (IEEE802.1s) MLD Snooping v1/v2,Multicast VLAN IGMP Snooping v1/v2, Max 1024 multicast groups, Fast log out Bidirectional data mirroring based on port Flow-based Rate Limiting Flow-based Packet Filtering 8*Output queues of each port 802.1p/DSCP priority mapping Diff-Serv QoS,Priority Mark/Remark Queue Scheduling Algorithm (SP, WRR,) Port-based Issuing ACL,ACL based on port and VLAN L2 to L4 packet filtering, matching first 80 bytes message. Provide ACL based on MAC, Destination MAC address, IP Source, Destination IP, IP Protocol Type, TCP/UDP Port, TCP/UDP Port Range, and VLAN, etc IP-MAC-VLAN-Port binding ARP inspection,Anti-DoS attack AAA & RADIUS,MAC learning limit Mac black holes,IP source protection IEEE802.1X & MAC address authentication Broadcast storm control,Backup for host datum SSH 2.0,SSL,Port isolation,ARP message speed limit User hierarchical management and password protection DHCP Client,DHCP Snooping,DHCP Server,DHCP Relay |
