All in One IoT Enclosure for Outdoor Environment Monitoring Solution
Iot, Power, Battery, Network All in One Outdoor IP65 IoT Enclosure Solution
Reference Video:
The Troubles that Traditional IoT Enclosure Brings to Customers
Environment monitoring solutions are usually deployed in projects such as smart city and regional environment monitoring. Because they are deployed outdoors, an IoT enclosure is required to carry components such as smart IoT gateway, power system, network backhaul, etc. However, because they are located outdoors, the environment is relatively complex.The biggest challenges faced in building environmental monitoring sites in these outdoor environments are as follows:
(1) Difficulty in obtaining electricity or the power grid is unstable.
(2) Challenges posed by the outdoor environment to the long-term stable operation of equipment.
(3) The diversity of environmental monitoring data requires different providers’ products integration.
(4) The network backhaul in outdoor rural area.
(5) Dashboard and alarms case by case different by projects.
Based on these problems, Edgeware helps overcome them by providing a one-stop solution that fully integrates sensors, all in one outdoor edge site, and software platform.
Edgeware One Stop Environment Monitoring Solution
Edgeware provides customers with a one-stop environment monitoring solution. The entire solution is divided into sensors, IoT Enclosure (All in One Edge Site), and cloud software options. Thus, the entire solution can be implemented for customers in one stop. Customers do not need to integrate various types of equipment.
Complete Environment Sensors
Edgeware has a very complete meteorology sensor portfolio, covering common sensor types such as rainfall, wind, temperature and humidity, light strength, PM2. 5, PM10, etc. For gas sensors, we also provide very complete gas sensors.
IoT Enclosure to Build All in One Edge Site
Edgeware’s IoT enclosure Edge Span series fully integrates power, battery, edge computing, network and other functions according to customer scenarios to form an IP65 IoT enclosure, helping customers to quickly and easily deploy outdoor environment monitoring solutions .
Cloud Software Options
We provide customers with a variety of cloud software options. First of all, Edgeware has its own convergence software platform, which can build different dashboards, statistics, alarms and other functions based on customer scenarios. We can also report data to the thingsboard software platform commonly used in the industry. For scenarios where customers need to use other software platforms, we can also report to third-party software platforms based on customer agreements.
Edgeware All in One IoT Enclosure for Environment Solution
Edgeware has a rich set of power, network and edge program modules. We will design all in one IoT enclosure that meet customer needs based on the customer’s scenarios. It is usually based on the architecture of Edgeware’s Edge Span series outdoor smart node. So that the following features can be achieved at the time of delivery:
- IP65 Ingress Protection with rustproof features.
- Plug and play, no more on site integration of outdoor cabinet.
- The power system adapted to your scenario and the battery capacity that matches your needs.
- Complete outdoor lightning protection design
- Backhaul network design based on actual site conditions
- Calculate, count and design a specially designed edge computing and control program for your site
Features of Edgeware All in One IoT Enclosure
IP65/NEMA 4
Edgeware all in one IoT enclosure provides full system IP65/NEMA 4 level ingress protection, which is very important for outdoor environment monitoring solution deployment environment.
Outdoor Optimized Rugged Design
System embedded in a cast aluminum shell that has an IK08 protection rating which is optimized for outdoor deployment.
No Rust for Long Term Operation
With a rust-proof design, Edgware IoT enclosure ensures that the entire system is completely free of rust and can operate stably for a long time.
Surge Protection
System with comprehensive lightning protection design which is dedicated to outdoor environment.
FAN Less Dissipation
Sytem is designed for outdoor edge network deployment. Fan cooling will increase the probability of replacing fans at the site, thereby increasing maintenance costs. We believe that fanless design with natural heat dissipation is the best cooling method for edge network equipment.
High Temperature Resistant Long Life Battery
High temperature resistant lithium batteries are designed to be embedded in the IoT Enclosure to ensure that the entire system can adapt to high temperature outdoor environments.
Node-Red Ready
The latest Node-Red version is embedded, provide pre-integrate customer node-red firmware service. Edgeware also provides customized program for customer’s scenario.
OPEN-WRT
4G node-red router in IoT enclosure is based on mature OPEN-WRT architecture for the 4G router function. With mature wireless functions that has been used by Edgeware outdoor scenarios.
Complete Protocol for Industrial Router
System is designed based on the industrial router architecture. Supports a full range of networ protocols. For example, it can support ISIS and OSPF as a Layer 3 access router node.
Complete VPN Protocols Supported
System supports mainstream VPN technologies such as OPEN-VPN, IPSEC VPN, GRE, PPTP, and L2TP. So customer can use VPN to simplify their internal network IP planning and ensure the network secruity.
POE+/POE++Functions
System has PoE+ Ports , the total PoE Power is 90W. Can also add one PoE++ 802.3bt port which can reach 110W. In most of environment monitoring solution , customers generally need to deploy devices such as cameras, which can be easily deployed along with the IoT enclosure.
Industrial and Control Interface
System supports 2 RS485, 1 RS232, 1 DI, and 1 DO. Modbus can be run on RS485. Therefore, customers can build their edge control site with the IoT enclosure to control devices such as battery BMS, solar controller, IoT Sensors, etc.
4G/5G Backhaul Capability
4G/5G module can be configured。The wireless module can be used as the primary and backup for the uplink port of the device.
WIFI Supported
System has 802.11n WIFI function as optional . It can provide small amount of WIFI access for users in edge network scenarios. It can also facilitate engineers to access WIFI for configuration and maintenance.
GPS Supported
All ine one IoT enclosure supports GPS function. It also has GPS tracking function, which can report coordinates, heading, speed, altitude and other information. It can be deployed in scenarios where tracking is required. It can also be used only for site location information.
Thingsboard Supported
Edgeware is a certified distributor of thingsboard. Our product fully supports the thingsboard software platform. The Edgeware development team also has extensive thingsboard development experience and can help customers customize and implement the functions they need.
Convergence Software Platform of IoT Enclosure for Environment Monitoring
Convergence Software Platform is a scenario-configurable software platform designed by Edgeware specifically for outdoor edge network unified management. Based on this software, you can easily implement various functions such as data collection, monitoring, statistics, display, and control logic association for outdoor environment solutions. In conjunction with Edgeware’s Edge Span series All in One edge site, you can easily achieve cloud and edge synchronization.When the Convergence software platform and IoT enclosure work together to provide an environment monitoring solution, it is easy to achieve integrated management and monitoring of environment sensors and all power and network devices in IoT enclosure.
Environment Sensors
ES-N01 multi-functions meteorological sensor is an all-in-one environment detection system developed by Edgeware. The main problem of traditional meteorological environment detection systems is that one sensor for each function, which leads to a large number of complex sensor integrations in order to test different types of data. With the increase in sensor types, the power supply and protocol integration of sensors will bring multiple problems and are not conducive to debugging. ES-N01 adopts an innovative concept to integrate multiple meteorological functions into one system, which greatly simplifies the customer’s site integration and installation. Customers can select the parameters of ES-N01 according to their needs to match the meteorological detection functions required by their scenarios.
Edgeware can provide a variety of environment sensors. Please consult sales staff for details.
