Solar Battery Enclosure with POE and 4G/5G-Edge Span S60-5G
Layer 500W Solar Controller ,2640Wh Lithium Battery,POE, IoT Edge Computing , 4G/5G All in One System
Solar Battery Enclosure with POE and 4G/5G
Edge Span S60-5GP
Edge Span S60-5GP is an all-in-one solar battery enclosure that integrates 5G router, WIFI, POE, Solar Power, Battery, edge computing and control functions. The system is mainly designed for a variety of scenarios such as video surveillance, outdoor WIFI, remote site coverage, energy network control, industrial network control, smart city, environmental detection, smart agriculture, etc. In conjunction with Edgeware or the customer's third-party IoT sensor, a more comprehensive one-stop solution can be achieved. Edge Span S60-5GP solar battery enclosure has a built-in Node-red programmable core, and Edgeware can implement the control, monitoring and management functions required by the customer according to the customer's scenario. It can also be delivered to the customer as a white box, and the customer can develop the corresponding scenario by themselves. The system is generally equipped with 3 802.3at (POE+) interfaces. Interfaces such as modbus, DC12V/DC48V, DI, DO interfaces which can be configured according to the customer's scenario requirements.
Features of Solar Battery Enclosure Edge Span S60-5GP
Designed for Outodor IoT
Edge Span S60-5GP solar battery enclosure is designed for outdoor access scenarios of IoT. The programmable core based on Node-red can easily access various IoT sensors. Through Thingsboard, the software end is configured to realize scenario-based deployment quickly. 5G backhaul makes the deployment of IoT no longer limited by the distribution of wired networks and optical fibers.
Rich Interface for Outdoor Scenario
Edge Span U60-5GP solar battery enclosure covers most interfaces for outdoor use and can provide a one-stop solution for outdoor IoT deployment. Use RS485 to connect to other devices via modbus, and for example, configure Di DO to control some relay devices. At the same time, Edge Span itself can provide various types of power for external devices according to the scenario.
Solar Power and Battery Backup
Edge Span S60 has built-in an industrial level MPPT solar controller designed for outdoor high temperature environments. Its small-scale design based on natural heat dissipation can make the entire system small and easy to deploy. At the same time, it has a built-in 2640Wh lithium battery which can generally provide Edge Span 48 hours work for the CCTV camera system when the weather has no solar. The solar controller and battery are fully monitored and managed by the software system.
Pre-Integration for Plug and Play
Completely revolutionize the installation mode of outdoor power solution. Integrate network, power, battery and enclosure into an all-in-one system. Complete integration test before leaving the factory, and realize plug and play and quick installation at the site.
Programbale Edge Computing and Control Core
Edge Span S60-5GP is equipped with an edge computing control core to meet the needs of outdoor IoT. It can collect IoT sensors and control and collect data from the Edge Span system itself according to the scenarios that customers need to implement. It also realizes data synchronization and computing collaboration between the cloud and the edge.
4G/5G Backhaul Capability
Edge Span S60-5GP solar battery enclosure can be used as a 4G/5G industrial router. We can configure different modules according to customer needs to match the wireless frequency bands required by customers. In addition, according to the actual bandwidth requirements of customers, the 4G module can be configured with CAT1, CAT4, CAT6, CAT12, etc. The wireless module can be used as the primary and backup for the uplink port of the device.
IP65/NEMA4X
The deployment scenario of Edge Span S60-5GP is based on edge IoT access. The deployment environment is generally harsh and on-site maintenance is difficult. Therefore, we designed the entire system to have an IP65/NEMA 4X protection level, thereby achieving long-term maintenance-free and greatly saving on-site maintenance costs.
Outdoor Optimized Rugged Design
The Edge Span S60-5GP solar battery enclosure is designed for the complex environment of outdoor IoT access scenarios. The whole system is based on a rugged design.
No Rust for Long Term Operation
The entire Edge Span S60-5GP system is built in a cast aluminum housing. Due to the advantages of the cast aluminum housing itself, the entire system is rust-proof. It is particularly suitable for deployment in extreme areas, such as forests, seaside, and high humidity areas.
Surge Protection
Another major challenge in the outdoor environment is surge protection. To address this challenge, the Edge Span S60-5G has a complete grounding design. At the same time, a complete lightning protection system is designed for all device interfaces. The signal interface has a 6kV level lightning protection, while the power interface has a 20Ka level lightning protection.
Complete POE+/POE++ Function
The typical configuration of Edge Span S60-5GP provides 3 802.3at (POE+) interfaces so that customers can power various WIFI APs, CCTV cameras and other devices at outdoor sites. For some special scenarios, 802.3bt (POE++) interfaces can be provided according to customer needs. We will recalculate the power budget of the entire solar battery enclosure based on the customer’s power so as to determine the final configuration plan with the customer.
Remote Monitoring and Management
When a site is working outdoors and is also a solar power based site, there are many things that the operation and maintenance personnel need to pay attention to. For example, the site is overcast and rainy for many days, causing the solar cells to run out, or the core equipment of the site is faulty. Edgeware provides a complete remote monitoring and management solution, allowing customers to know the overall operation and statistics of the site at the NOC.
Edge Span S60-5GP Solar Battery Enclosure General Specification
- IP65/NEMA4 Waterproof
- W*H*D 295mm*355mm*214mm
- 22kg
- Aluminum Cast Enclosure Rust-Proof
- Operating Temperature:-20~+55°C
- Working Humidity:5%~90%
- Power Surge Protection:20Ka
- Worldwide 5G/4G Band Supported
- WIFI Optional
- GPS Optional
- RS485/RS232/DI/DO Optional
- Industrial 5G/4G POE Router Module Embedded
- 1*1000Base-X/1000Base-T Combo WAN Port
- 4*1000Base-T LAN Ports
- 3 LAN Ports 802.3at POE+ ( Can configure 802.3bt POE++ one port as requested)
- 500W MPPT Solar Controller
- 2640Wh Lithium Battery(48V55AH)
- Thingsboard Support Optional
- Node-Red Optional
Dimension and Weight
Edge Span S60-5GP solar battery enclosure dimension and weight as followings:
- The weight of the whole system is 22kg (with battery installed)
- Dimension of the whole system: 351mm*295.5mm*214mm (W*H*D)
Installation of Edge Span S60-5GP Solar Battery Enclosure
Pole Mounting Installation
Edge Span S60-5GP supports pole mounting installation
Wall Mounting Installation
Edge Span S60-5GP supports wall mounting installation
Application of UPS for CCTV System
The solar and battery configuration of the Edge Span S60-5GP solar battery enclosure allows the edge IoT solution to be easily deployed in any environment. This allows various industrial controls, smart agriculture, CCTV cameras, WIFI APs, etc. to be deployed in remote areas without being restricted by electricity.
Main Function Units
As shown in the figure above, this is the configuration of Edge Span S60-5GP
Solar Power Generation and Usage Statistics
Edge Span S60-5GP has a built-in solar power statistics function, which can record the solar energy generation and usage data every hour, day, week, and year on the software platform and the local UI of the device. This allows customers to have a more detailed understanding of the site’s operation and becomes the data basis for expansion and future site construction.
Time-Scheduled Load On/Off
Edge Span S60-5GP can schedule the opening and closing of different POE ports based on time. For example, the WIFI AP and some unimportant sensors can be turned off at night to save battery power at night. This ensures that important devices can have longer system autonomy time.
Conditional Load On/Off
Edge Span S60-5GP can turn on and off different loads according to preset conditions. For example, when the remaining battery capacity is 40%, non-important loads are turned off, leaving only important loads running. This ensures that the ultimate function of the entire system can extend its battery operation time as much as possible without solar energy.
Solar Controller State Monitoring
When the solar battery enclosure is deployed outdoors, controlling the operating status of the solar controller is very helpful for the operation and maintenance of the entire network. Problems can be diagnosed remotely so that on-site repair and maintenance can be completed faster and better when needed. Edge Span’s built-in solar controller can be remotely monitored and managed by Edgeware’s Convergence software platform, allowing users to easily implement remote operation and maintenance.
Battery Management System
The life and operation of the battery are also very important for the operation of edge site system, especially when there are a large number of sites and power outages are very frequent. After 5-10 years of site deployment, it is inevitable that some batteries will need to be replaced because they have exceeded the usage limit. The built-in BMS of Edge Span S60 can provide you with various information such as battery voltage, current, power, power, number of cycles, single cell voltage, cell voltage balance, etc. to help you understand its operation status through our software platform at the maintenance center.
IoT Sensor Edge Control and Computing
Edge Span S60-5GP can be designed for the integration of IoT sensors and devices. Edgeware has a complete portfolio of IoT devices for customers to choose from. Third-party IoT devices of customers can also be customized and integrated based on the programmable edge computing capabilities of Edge Span S60-5GP. Thus, a one-stop landing of sensors, edge sites, and software is formed.
5G and WAN Port Backup Each Other
Edge Span S60-5GP is designed with the reliability of the overall network backhaul of the system in mind. It can set up a master-slave connection between 4G/5G and Fiber WAN. When the master link is down, the slave link swaps as the main link. When the master link is back, the traffic goes back to the main link.
Main Steam VPN Supported for Enhanced Security
Edge Span S60-5GP supports mainstream VPN technologies, greatly simplifying IP planning during network deployment. At the same time, it also greatly increases the security of site data for sites with high data security requirements.
Envrionment Management
The deployment environment of solar for Edge Span is relatively complex, so Edge Span has built-in temperature and humidity sensors that can synchronize real-time conditions to the software platform.
POE Switch Management and Control
The POE port of Edge Span S60-5GP can be remotely monitored by software for real-time POE power consumption and current. At the same time, for video surveillance scenarios, in many cases when CCTV camera is stuck, you can restart the camera by restarting the corresponding POE port of Edge Span through software.
Third Party Software Platform Integration
Although Edgeware has its own software platform, customers often have their own considerations for the management of the entire network and have their own management system or OSS. UPS for CCTV is only part of customer network.Therefore, Edge Span can also provide services that are integrated into your third-party platform.
PRTG Software Platform
https://www.paessler.com/
Thingsboard Software Platform
https://thingsboard.io/
Customers have various ways of managing Edge Span S60-5GP, so we also provide MQTT and SNMP protocols to connect with customers’ software platforms.
Customization Development
We also provide customers with customized development based on Edge Span U60 UPS for CCTV system, which includes the following services:
(1) Embed the customer’s equipment in Edge Span S60 enclosure
(2) Increase or decrease the battery capacity
(3) Customize the control logic of the whole machine. For example:
A. When the battery capacity is less than 40%, close several specific POE ports to put the whole machine into power saving mode.
Read a specific sensor, set an alarm, and turn on a certain device.
B. The above are just simple examples, because our company has customized and developed many projects and it is impossible to list them one by one. In short, we are very willing to carry out customized development based on customer scenarios to achieve one-stop delivery.
Specifications
| Edge Span S60-5GP General Specification | |
| Dimension | 351mm*214mm*355.5mm(W*D*H) |
| Enclosure Material | Aluminum Cast Enclosure |
| Ingress Protection | IP65/NEMA4 |
| IK Rating | IK08 |
| Weight | 22kg |
| Operating Temperature and Humidity | -20~+55°C/10 % to 95 % non-condensing |
| System Surge Protection | Power Input Surge Protection:20KA Ethernet Port:6KV |
| Solar Input Voltage | 24-50VDC Rated Voltage Input:36VDC |
| Solar Input Current | 10A |
| Solar Max Input Current | 20A |
| Solar Controller Type | MPPT |
| Solar Controller Capacity | 500W |
| System Rated Output Voltage | 54VDC |
| System Output Voltage Range | 42-54VDC |
| System Output Power | 500W |
| System Max Output Current | 10A |
| Battery | 2640Wh Lithium Battery(48V55AH) |
| Battery Management | Embedded with BMS |
| Battery Rated Voltage | 54V |
| Discharging Voltage Cutoff | 42V |
| Max Charging and Discharging Current | 10A |
| 5G Router Module | EX900 Industrial 5G Router Module |
| Ethernet Port | 4*10/100/1000Base-T RJ45 ports 1*100/1000Base-X SFP |
| PoE | Downlink ports 1-3 can support IEEE 802.3af/at 30W POE+，port 4 supports 802.3bt 110W(Optional). Configure with 300W UPS Max POE Power 240W Configure with 100W UPS Max POE Power 80W(802.3bt Not recommended) |
| RS485 | Can be configured as scenario request , run as modbus |
| DI/DO | Can be configured as scenario request |
| Edge Span S60-5GP Wireless and Network Protocol Specification | |
| 5G and Wireless | |
| APN | Auto APN |
| 5G | 5G: 5G SA: DL 2.4 Gbps,UL 900 Mbps; 5G NSA: DL 3.4 Gbps; UL 550 Mbps, LTE: up to 1.6 Gbps(Cat 19); UL up to 200 Mbps(Cat18). |
| Edge Span S60-5GP Wireless and Network Protocol Specification | |
| WIFI(Optional) | |
| WIFI Mode | IEEE 802.11b/g/n/ac, Access Point (AP), Station (STA) |
| WiFi Security | WPA2-Enterprise – PEAP, WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP, Auto Cipher modes, client separation |
| SSID | SSID hidden mode,dual SSIDs. |
| Network Protocol | |
| Routing | Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, RIPng) |
| Network protocols | TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPnP, SSH, DHCP, Telnet client, SNMP, MQTT, Wake On Lan (WOL) |
| Connection Monitoring | TCP-Ping Reboot, Periodic Reboot, LCP and ICMP for link inspection |
| DHCP | Static and dynamic IP allocation, DHCP Relay |
| Network Backup | WAN and Mobile back up, can be one as main one as backup. |
| VPN | |
| OpenVPN | Multiple clients and server can be running simultaneously, 12 encryption methods |
| OpenVPN Encryption | DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC |
| IPsec | IKEv1, IKEv2, supports up to 4 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256) |
| GRE | GRE tunnel |
| PPTP, L2TP | Client/Server services can run simultaneously |
| Management | |
| SSH | SSH (v1, v2) |
| SNMP | SNMP (v1, v2, v3), SNMP trap |
| MQTT | MQTT |
| GPS | |
| GPS | GPS Ooptional |
