Node Red IoT Gateway EX200
OPEN-WRT Architecture IoT Router/Gateway with Node-red,GPS,4G All in One System
Node Red IoT Gateway EX200
Node-Red IoT gateway EX200 is an industrial router/gateway developed by Edgeware based on edge computing and edge control scenarios. EX200 is an industrial router based on OPEN-WRT architecture, which has built-in the latest Node-Red programmable open source software to better match the changing needs and scenarios of edge control and edge computing through programmable capabilities. All core components of EX200 are designed to industrial standards, greatly enhancing the reliability of the system, and its operating temperature range reaches -20℃-70℃, which is enough to cope with harsh deployment environments. EX200 is specially developed for some lightweight and low-cost Edge IoT control scenarios. The network port is simplified to 1*1000Base-T LAN port and 1*1000VBase-T WAN port. And there are 1*RS232 and 1*RS485 interfaces for IoT sensor connection. EX200 also has WIFI and GPS functions, which can be configured according to customer needs. The EX200 is equipped with dual SIM card slots so that customers can insert two primary and backup SIM cards in scenarios with high reliability requirements.
Product Video
Features of Node-Red IoT Gateway EX200
Node-Red Ready
Lastest Node-Red is embedded, and the required nodes can be pre-set in the factory settings according to customer needs for easy use. Edgeware can also customize the program in the Node-Red according to customer scenario needs.
OPEN-WRT
Mature OPEN-WRT architecture for the 4G router function. With mature wireless functions that has been used by Edgeware outdoor scenarios.
Complete Protocol for Industrial Router
EX900 is different from traditional node-red smart gateways. It is designed based on the industrial router open-WRT architecture. Traditional node-red gateways do not support a complete range of communication protocols, while EX200 supports a full range of network protocols.
Complete VPN Protocols Supported
Supports mainstream VPN technologies to facilitate customers to establish VPN tunnels to the central office using the EX200 IoT gateway as the edge node, which not only protects data security, but also facilitates planning of the entire network private address in the 4G wireless backhaul scenario. EX200 supports OPEN-VPN, IPSEC VPN, GRE, VXLAN VPN technologies.
4G Wireless Backhaul Capability
EX200 can configure different modules according to customer needs to match the wireless frequency bands required by customers. In addition, according to the actual bandwidth requirements of customers, the 4G module can be configured with CAT1, CAT4, CAT6, CAT12, etc. The wireless module can be used as the primary and backup for the uplink port of the device.
WIFI Supported
EX200 WIFI function can be configured which can be greatly used like maintenance WIFI to make the maintenance work more convenient.
GPS Supported
EX900 Node-red Router supports GPS function. It also has GPS tracking function, which can report coordinates, heading, speed, altitude and other information. It can be deployed in scenarios where tracking is required. It can also be used only for site location information.
GPS information can be managed by Node-red.
SNMP Supported
SNMP is a common protocol used by large enterprises, governments, and telecom operators. General node-red gateways usually lack SNMP protocol, but EX900 has a built-in complete SNMP protocol, which can be easily managed by the customer’s SNMP OSS in large projects, such as Zabbix, Solar Wind, etc.
Thingsboard Supported
EX900 fully supports the thingsboard software platform. The Edgeware development team also has extensive thingsboard development experience and can help customers customize and implement the functions they need.
PRTG Supported
EX900 also supports reporting device monitoring and management information to the PRTG software platform.
EX200 Node-Red IoT Gateway General Specification
- IP30
- W*D*H 99.7mm*98.8mm*24.4mm 270g
- Din Rail Installation
- Operating Temperature:-30℃~+75℃
- Working Humidity:<95%
- Input Voltage:DC7V-DC48V
- CPU:ARM A53 , MTK mt7981B Dual Core @1.3GHz
- RAM:1GB, DDR4
- EMMC RAM: Default 4GB (8~32GB optional)
- WAN Port:1*1000Base-T Port
- LAN Ports:1*1000Base-T Port
- 1*RS485
- 1*RS232
- 2*SIM Slots
- GPS Optional
- Node-Red Embedded
Application of EX200 IoT Gateway as Edge Network Control Node
EX200 is suitable for deployment at the edge of the network, with 4G or Ethernet Fiber backhaul for uplink. Downlink is achieved through Node-red programmability, combined with EX200 hardware features such as GPS, 485 etc. to deploy a one-stop delivery solution.
Please note that Edgeware has encountered a large number of scenarios in scenario delivery. It is recommended that you communicate with us, and you may be able to use many of our Node-Red project nodes.
Edgeware has the ability to provide one-stop delivery
EX200 Node-Red IoT gateway is an edge control gateway/router from Edgeware and is part of the overall solution. Edgeware has always adhered to the concept of one-stop delivery. We can help customers design the entire scenario and achieve end-to-end delivery with our complete portfolio of peripheral sensors and control devices.
Node-Red Application and Scenarios Developed by Edgeware
Edgeware has used Node-red to build a large number of scenarios and projects. We can also use Node-red to develop scenarios for customers. We are also willing to open previously developed modules to customers to achieve rapid scenario delivery. Edgeware has developed scenarios:
- Smart Traffic
- CCTV Camera site with 4G backhaul
- solar power related
- battery management
- UPS and Rectifiers
- Telecom site
- Air conditioner management
- Power Efficiency manamgent
The above are just examples. Please contact us for specific requirements.
Specifications
| EX200 Node-Red IoT Gateway |
Interface | |
Ethernet Port | 1*1000Base-T LAN Port 1*1000Base-T WAN Port |
Power Input | 9-48V |
Industrial Port | 1*RS232 , 1*RS485 |
Antenna | 1*4G antenna 1*WiFi antenna |
SIM Slot | 2*SIM slots |
Physical Specifications | |
Dimension | 99.7mm*98.8mm*24.4mm |
Weight | 270g |
Installation Method | Ding rail installation |
Ingress Protection | IP30 |
CPU and Memory | |
CPU | ARM-A53 dual core CPU 1.3GHz (MTK mt7981B) |
RAM | 1GB, DDR4 |
EMMC | Default 4GB (8-32GB optional) |
Power Efficiency | |
Standby Power | 2.4W |
Working Power | 5.2W |
Working Environment | |
Working Temperature | -30℃~75℃ |
Working Humidity | <95% |
Basic Functions | |
Network Access | Mobile: Supports DHCP APN WAN: Support Static IP, DHCP，PPPOE |
WAN Port | 1*1000Base-T Port |
LAN Port | 1*1000Base-T Port |
NAT | DNAT,SNAT,DMZ |
WLAN | Supports AP and Station modes, 2.4GHz and 5.8GHz frequency band,support WiFi6 AX1200 |
DTU | Supports TCP, UDP, MQTT, and |
VPN | OpenVPN ,L2TP,GRE,VXLAN,IPSEC |
Network Protocols | TCP, UDP, IPv4 ,ICMP, NTP, DNS, HTTP, TFTP, SSL v3 , TLS, ARP,Isis, OSPF,BGP,PPPoE, SSH, DHCP,Telnet, MQTT, IEEE802 |
Connection Monitoring | ICMP-Ping Reboot, Periodic Reboot, LCP and ICMP for link inspection |
DHCP | Static and dynamic IP allocation, DHCP Relay |
Network Backup | WAN and Mobile and WIFI Sta back up, can be one as main one as backup |
GPS | GPS Optional |
4G | |
APN | Auto APN |
Access Authentication | PAP/CHAP/PAP+CHAP |
4G Wireless Modem | CAT1/CAT4/CAT6/CAT12 Modules can be configured |
4G Network Support | LTE-FDD/LTE-TDD/WCDMA/GSM |
Frequency Bands | Configured based on customer’s region |
Edge Control | |
Node-Red | Supported |
