Edge Span S60-5GP All in One 5G Solar Outdoor IoT Enclosure
500W Solar Power MPPT, 5G Router with Edge Computing, POE and Battery All in One System
1. Edge Span S60-5GP Solar Outdoor IoT Enclosure Dimension
Edge Span S60-5GP Solar Outdoor IoT Enclosure Dimension
2. Edge Span S60-5GP Solar Outdoor IoT Enclosure Application
Typical Scenario for Edge Span S60-5GP Solar Outdoor IoT Enclosure
Edge Span S60-5GP is an outdoor maintenance-free all-in-one outdoor IoT enclosure that integrates communications, solar, lightning protection,POE and IoT edge control gateway. The product is specially optimized according to the pain points of outdoor edge IoT deployment to achieve the following main functions:
- Industrial grade 5G router with 3 Channel POE+/POE++ (802.3bt 110W POE++ port can be configured based on customer request)
- IoT edge control gateway for integration of IoT sensors
- Industrial grade 500W MPPT solar system
- 48V55Ah lithium battery(48-72 hours system autonomy)
- Software system for remote management and monitoring
- Surge protection design
- Full aluminum IP65 enclosure for whole system natural heat dissipation ability.
3.Edge Span S60-5GP Port Configuration
Port Configuration of Edge Span S60-5GP Solar Outdoor IoT Enclosure
The above ports are for reference only. The actual configuration can be made according to customer needs. For example, the following configuration changes:
(1) POE can be configured as 3*Ports 802.3at, or 2*Ports 802.3at and 1 Port 802.3bt
(2) IoT sensor integration provides different options based on customer request, and up to 4*Ports external sensor integration can be configured. It can adapt to common protocols such as PLC, Modbus, BACNet, etc. Customized development and docking can be carried out according to the customer’s sensor protocol.
(3) It can output DC48V, DC12V, DC24V voltage according to customer needs.
4.System Main Funciton Units
Edge Span S60-5GP Main Function Units
5.Main Features
5.1 IoT Devices Integration
Edge Span S60-5GP IoT Devices Integration
Edge Span S60-5GP solar outdoor IoT enclosure can be configured with the corresponding IoT devices integration interface according to customer needs. Typical configurations include RS485 Modbus, DC12V, and DC24V. DI and DO interfaces can also be configured to integrate different IoT devices. Edgeware has a complete IoT sensor portfolio and can also integrate customers’ third-party IoT devcies. Edgeware’s Convergence software platform has a configurable dashboard that can be configured according to customer scenarios to fully adapt to your dedicated scenarios.
5.2 End to End Solution Deployment
Outdoor IoT Solution End to End Deployment
As the core of outdoor IoT control, Edge Span S60-5GP solar outdoor IoT enclosure can deliver different End to End solutions to customers:
(1) Industrial control
(2) Smart city
(3) Smart traffic
(4) Smart Agriculture
No matter how the scenario changes, with Edge Span S60-5GP as the core and Edgeware’s customized services, you can always achieve End to End deployment.
5.3 Unified Monitoring and Management
Edge Unified Monitoring and Management
The Edge Span S60-5GP solar outdoor IoT Enclosure can serve as the core node for edge management, monitoring and managing equipment across the entire site, including the customer’s third-party devices, thus turning the entire solution into a unified management site.
5.4 5G and Ethernet Link Backup
5G and Ethernet Link Backup
The Edge Span S60-5GP solar outdoor IoT Enclosure can use 5G or Ethernet WAN as the uplink interface, and the two can back up each other.
5.5 Main Stream VPN Supported
Main Stream VPN Supported
The Edge Span S60-5GP solar outdoor IoT enclosure supports mainstream VPNs, which can greatly optimize data security and IP Planning at customer edge sites.
5.6 Solar System Remote Monitoring and Managemenet
Edge Span S60-5GP Solar System Remote Monitoring and Management
When the solar battery enclosure is deployed outdoors, controlling the operating status of the solar controller is very helpful for the operation and maintenance of the entire network. Problems can be diagnosed remotely so that on-site repair and maintenance can be completed faster and better when needed. Edge Span’s built-in solar controller can be remotely monitored and managed by Edgeware’s Convergence software platform, allowing users to easily implement remote operation and maintenance.
5.7 Solar Battery Management System(BMS)
Edge Span S60-5GP Solar Battery Management System
Edge Span S60 solar outdoor IoT enclosure is usually deployed in remote outdoor areas, and the maintenance cost is relatively high. The battery status and service life will largely cause on-site maintenance and repair. Therefore, the built-in battery of Edge Span is equipped with Battery Management System (BMS). BMS collects key parameters such as battery voltage, current, capacity, number of cycles, etc. and synchronizes them to the software platform for remote management and maintenance by operation and maintenance engineers.
5.8 Environment Monitoring in the Enclosure
Edge Span S60-5GP in Enclosure Environment Management
The deployment environment of solar battery enclosure is relatively complex, so Edge Span has built-in temperature and humidity sensors that can synchronize real-time conditions to the software platform.
5.9 POE Remote Reset
Remote POE Reset
Edge Span solar outdoor IoT enclosure has built-in POE remote reset function to help customers remotely restart CCTV Camera or IoT devices. No need to go to the site, just operate on the software platform to restart the corresponding devices.
5.10 Solar Power Generation and Usage Statistics
Solar Statistics on Local UI and Software Platform
The Edge Span S60 solar outdoor IoT enclosure has a built-in solar statistics algorithm that can implement solar statistics locally on the site and also simultaneously implement solar statistics on the software platform, so that customers can better understand the output and use of solar energy.
5.11 Load Time Schedule Turn On and Off
Load Turn On/Off Based on Time Schedule
The Edge Span S60 solar outdoor IoT enclosure can be turned on or off according to pre-configured condition to use energy more efficiently. For example, when battery is less then 40%， turn off some loads.
6.Edge Span S60 5GP Solar Outdoor IoT Enclosure Specifications
Edge Span S60-5GP 5G Solar Outdoor IoT EnclosureSpecification | |
Dimension | W*H*D 295mm*355mm*214mm |
Weight | 23kg(with all system） |
Material | Aluminum |
Ingress Protection | IP65 |
Heat Dissipation | No fan design, natural heat dissipation |
System Operating Temperature | -20~+75°C, 5%~90% RH Non condensing |
Solar Controller | 500W DC48V 10A MPPT solar controller with remote control |
Battery | 48V55AH MnNiCo ternary lithium battery with or without BMS |
Network and System Surge Suppression | Contact discharge 8KV, air discharge 15KV, port lightning protection common-mode 4KV, differential mode 2KV |
Network Module: | GE Downlink: 3*10/100/1000M Base-T ports GE Uplink : 1*10/100/1000M Base-X and 1*10/100/1000MBase-T port 1*RS485 1*RS232 2*DI 2*DO 5G Uplink Industrial 5G Router Module |
PoE: | Downlink ports support 802.3 at/af, max PoE power 90W. 802.3 bt 60W/110W POE module optional. |
Output Power | DC12V DC48 can be customized based on requirement |
System Monitoring and Management | Work with Edgeware Convergence software platform to perform system monitoring and management |
Environment Monitoring | System temperature, humidity. Box open and close status |
Solar Monitoring and Control | Solar power generation, usage and battery charge statistics Solar system working status Solar system remote turn on/ off based on time scheduling |
Battery Status Monitoring | Battery voltage , current, remaining capacity, temperature Battery working status, battery charge and discharge current Battery health estimation( Battery life time estimation ) |
External Light Control | External light control |
Typical Application Scenario | Solar LTE all in one system , Industrial control , Electricity control |
5G/4G Band | 5G NR 5G NR LTE: B34/ 38/ 39/ 40/ 41/ 42/ 43/ 48 |
Features Supported | APN, VPDN IEEE 802.11b/g/n/ac(When wifi function is configured） Static IP, DHCP, PPPoE CHAP/PAP/MS-CHAP/MS-CHAPV2 DHCP Server/Client/Relay, DNS Relay, IPv6 Static Routing, Policy routing, RIP ICMP, DDNS, VLAN,SNMP Modbus TCP (Slave/Master) Standard TCP/UDP transparent transmission TCP/UDP agency (LAN Connection DTU) Anti CSRF Radius, TACACS+ NAT, PAT, DMZ, Port Forward IP/Domain/MAC Filter Access Control List (ACL) PPTP, L2TP, GRE, IPIP, OpenVPN IPSec IKEv2, SHA2, AES256, CA, DMVPN, EzVPN LCP, Heartbeat Package link maintenance, ICMP Detection, Self-diagnostic, Auto-recover HTTP, Telnet, SSH, Serial Port, SMS, SNMP V1/V2/V3, SNMP TRAP, REACTOR CLOUD Local, Remote Reboot, Scheduled Reboot |
Link Protection | WAN Uplink as main, LTE as backup Or Reverse |
