Edge Span U60 5GP All in One 5G Outdoor IoT Enclosure

Edge Span U60-5GP All in One 5G Outdoor IoT Enclosure

300W UPS, 5G Router with POE and Battery IoT Sensor Integration All in One System

1.Edge Span U60-5GP Outdoor IoT Enclosure Dimension

2.Edge Span U60-5GP Outdoor IoT Enclosure Application

Typical Scenario for Edge Span U60-5GP Outdoor IoT Enclosure

Edge Span U60-5GP is an outdoor maintenance-free all-in-one outdoor IoT enclosure that integrates communications, UPS, lightning protection,POE and IoT edge control gateway. The product is specially optimized according to the pain points of outdoor edge IoT deployment to achieve the following main functions:

  • Industrial grade 5G router with  3 Channel POE+/POE++ (802.3bt 110W POE++ port can be configured based on customer request)
  • IoT edge control gateway for integration of IoT sensors
  • Industrial grade 300W DC-UPS 
  • 48V10Ah lithium battery(2-4 hours system autonomy)
  • Software system for remote management and monitoring
  • Surge protection design 
  • Full aluminum IP65 enclosure for whole system natural heat dissipation ability. 

3.Edge Span U60-5GP Outdoor IoT Enclosure Port Configuraton

Port Configuration of Edge Span U60-5GP Outdoor IoT Enclosure

The above ports are for reference only. The actual configuration can be made according to customer needs. For example, the following configuration changes:

(1) POE can be configured as 3*Ports 802.3at, or 2*Ports 802.3at and 1 Port 802.3bt

(2) IoT sensor integration provides different options based on customer request, and up to 4*Ports external sensor integration can be configured. It can adapt to common protocols such as PLC, Modbus, BACNet, etc. Customized development and docking can be carried out according to the customer’s sensor protocol.

(3) It can output DC48V, DC12V, DC24V voltage according to customer needs.

4.System Main Funciton Units

Edge Span U60-5GP Main Function Units

5.System Main Funciton Units

5.1 IoT Devices Integration

Edge Span U60-5GP IoT Devices Integration

Edge Span U60-5GP can be configured with the corresponding IoT devices integration interface according to customer needs. Typical configurations include RS485 Modbus, DC12V, and DC24V. DI and DO interfaces can also be configured to integrate different IoT devices. Edgeware has a complete IoT sensor portfolio and can also integrate customers’ third-party IoT devcies. Edgeware’s Convergence software platform has a configurable dashboard that can be configured according to customer scenarios to fully adapt to your dedicated scenarios.

5.2 End to End Solution Deployment

Outdoor IoT Solution End to End Deployment

As the core of outdoor IoT control, Edge Span U60-5GP outdoor IoT enclosure can deliver different End to End solutions to customers:

(1) Industrial control

(2) Smart city

(3) Smart traffic

(4) Smart Agriculture

No matter how the scenario changes, with Edge Span U60-5GP as the core and Edgeware’s customized services, you can always achieve End to End deployment.

5.3 Unified Monitoring and Management

Edge Unified Monitoring and Management

The Edge Span U60-5GP outdoor IoT Enclosure can serve as the core node for edge management, monitoring and managing equipment across the entire site, including the customer’s third-party devices, thus turning the entire solution into a unified management site.

5.4 5G and Ethernet Link Backup

5G and Ethernet Link Backup

The Edge Span U60-5GP outdoor IoT Enclosure can use 5G or Ethernet WAN as the uplink interface, and the two can back up each other.

5.5 Main Stream VPN Supported

Main Stream VPN Supported

The Edge Span U60-5GP outdoor IoT enclosure supports mainstream VPNs, which can greatly optimize data security and IP Planning at customer edge sites.

5.6 UPS Remote Monitoring and Managemenet

Edge Span U60-5GP UPS Remote Monitoring and Management

UPS system is a critical unit for outdoor IoT enclosure. Edge Span’s built-in UPS can be remotely monitored and managed by Edgeware’s Convergence software platform, allowing users to easily implement remote operation and maintenance.

5.7 Battery Management System(BMS)

Edge Span U60-5GP Battery Management System

Outdoor IoT enclosure is usually deployed in remote outdoor areas, and the maintenance cost is relatively high. The battery status and service life will largely cause on-site maintenance and repair. Therefore, the built-in battery of Edge Span is equipped with Battery Management System (BMS). BMS collects key parameters such as battery voltage, current, capacity, number of cycles, etc. and synchronizes them to the software platform for remote management and maintenance by operation and maintenance engineers.

5.8 Environment Monitoring in the Enclosure

Edge Span U60-5GP in Enclosure Environment Management

Edge Span has built-in temperature and humidity sensors that can synchronize real-time conditions to the software platform.

5.9 POE Remote Reset

Remote POE Reset

Edge Span has built-in POE remote reset function to help customers remotely restart CCTV Camera. No need to go to the site, just operate on the software platform to restart the corresponding CCTV camera.

6.Edge Span U60-5GP Outdoor IoT Enclosure Specifications

Edge Span U60 5GP All in One Smart Node Specification


W*H*D 295mm*355mm*150mm


11.5kg(with all system)



Ingress Protection


Heat Dissipation

No fan design, natural heat dissipation

System Operating Temperature

-20~+75°C, 5%~90% RH Non condensing


Rated Power 300W

Input 110V/220V 50/60Hz Output 42.00-58.00VDC


48V5AH or 48V10AH Lithium Battery with BMS

Network and System Surge Suppression


System Power Protection

10A 110v/220v

Leakage Protection

Overvoltage Protection

Under Voltage Protection

Overcurrent Protection

Short circuit Protection

Lightning Protection

Network Module:

5G Router Module 

GE Downlink: 3*10/100/1000M Base-T ports

GE Uplink : 1 *10/100/1000M Base-X or Base T port

5G Router Embedded with Following Band Supported:



B1/ 2/ 3/ 4/ 5/ 7/ 8/ 12/ 13/ 14/ 17/ 18/ 19/ 20/ 25/ 26/ 28/ 29/ 30/ 32/ 66/

B34/ 38/ 39/ 40/ 41/ 42/ 43/ 48


3*POE/POE+ Ports, per Port 30W

Can configure POE++ 802.3bt module with 110W, max 2 Channels

Output Power

DC12V DC48 can be customized based on requirement

Output and Input Signal

External Sensor Integration can be customized based on requirement

System Monitoring and Management

Work with Edgeware Convergence software platform to perform system monitoring and management

Environment Monitoring

System temperature, humidity.

Box open and close status

UPS Status Monitoring

Input Voltage, Output Voltage

Input/Output Power,Rated Power

Battery Charge/Discharge Current

Input Current, Load Current

Normal, Power Grid Off, Fault

AC Power Input Monitoring

Remote Control

Failure Status






Current leakage

Battery Status Monitoring

Battery voltage , current, remaining capacity, temperature

Battery working status, battery charge and discharge current

Battery health estimation( Battery life time estimation )

External Light Control

External light control 

Typical Application Scenario

cctv cabinet,solar cabinet, solar termination cabinet, Solar Controller enclosure, video surveillance cabinet, IoT Cabinet, IoT device enclosure, IoT enclosures

Smart City, Industrial Control, video surveillance, Telecom

 Features Supported


IEEE 802.11b/g/n/ac(When wifi function is configured)

Static IP, DHCP, PPPoE


DHCP Server/Client/Relay, DNS Relay, IPv6

Static Routing, Policy routing, RIP


Modbus TCP (Slave/Master)

Standard TCP/UDP transparent transmission

TCP/UDP agency (LAN Connection DTU)


Radius, TACACS+

NAT, PAT, DMZ, Port Forward IP/Domain/MAC Filter Access Control List (ACL)


LCP, Heartbeat Package link maintenance, ICMP Detection, Self-diagnostic, Auto-recover


Local, Remote Reboot, Scheduled Reboot

 Link Protection

 WAN Uplink as main, LTE as backup

Or Reverse