Outdoor Cabinet of UPS for Security Cameras-Edge Equation Lite U300
Outdoor UPS Modular Cabinet Designed for CCTV Scenario
One Equation Unlock Everything
![](https://edgewaretech.com/wp-content/uploads/2024/07/Outdoor-Cabinet-of-UPS-for-Security-Cameras-2048x1365.webp)
What is Outdoor Cabinet of UPS for Security Cameras
The scenarios of UPS for security cameras are divided into indoor and outdoor. Indoor scenarios are relatively simple, while outdoor scenarios are relatively complex. Outdoor cabinet of UPS for security cameras is a device designed specifically for CCTV scenarios. It must have a reliable, efficient and stable industrial UPS to adapt to outdoor high temperature environments. In addition, it must have a high temperature resistant and high energy density battery, and the battery needs to be customized according to the project's requirements for system autonomy time. More importantly, unlike the general civilian CCTV camera scenario, large-scale video surveillance networks generally use POE power supply to ensure power supply distance and reliability. Therefore, outdoor cabinet of UPS for security cameras must have POE power supply to adapt to the power supply requirements of serious projects. Finally, unlike Edgeware's all in one smart node, the design of outdoor cabinet of UPS for security camera reserves at least 4U of equipment installation space, allowing customers to easily install third-party devices such as access routers and satellite routers required for their own projects to build a fully functional and stable CCTV camera site.
Features of Edge Equation Lite U300 UPS for Security Cameras
![](https://edgewaretech.com/wp-content/uploads/2024/07/Outdoor-Cabinet-of-UPS-that-is-modular-design-.png)
Modular Design
The entire UPS for security cameras is based on modular design. Different from the traditional outdoor UPS cabinet, Edge Equation Lite U300 uses a slot-based design for functional modules such as UPS, MCU, Battery, POE Switch, 4G/5G, etc. This makes it easy to repair and replace, and each module is pre-integrated at the factory without complicated wiring and on-site integration. This greatly enhances the reliability and delivery speed of the system.
![](https://edgewaretech.com/wp-content/uploads/2024/07/High-Integration-and-Small-Size-for-Outdoor-Cabinet-of-UPS-for-Security-Camera.webp)
High Integration and Small Dimension
The transportation cost of outdoor installation is very high. If the UPS for security cameras is too large and heavy, then cranes and other tools will be used for installation. You can imagine how much the installation cost will increase. Therefore, Edgeware’s design concept has always been to be as highly integrated and miniaturized as possible. All in One. The highly integrated system of Edge Equation Lite U300 UPS for security cameras saves at least 50% in volume and weight compared to other manufacturers with the same configuration, thereby greatly optimizing the transportation and installation costs of customer on-site installation.
![](https://edgewaretech.com/wp-content/uploads/2024/07/Hotswap-FAN-of-UPS-for-Security-Camera.webp)
Hotswap FAN System
Hotswap FAN configured in tehe UPS for security camera cabinet. Fans are mechanical parts. Even if they are highly reliable, there is a certain probability that they will have problems. At this time, replacement is required. The optimized design of Edge Equation Lite U300 makes it possible to replace the FAN without turning off the power system or removing the device from the pole or wall to implement hotswap. This simplifies maintenance and avoids network interruption.
![](https://edgewaretech.com/wp-content/uploads/2024/07/Lightning-Protection-for-Outdoor-UPS-CCTV-Camera.webp)
Surge Protection
Another major challenge in the outdoor environment is surge protection. UPS for security camera requires a comprehensive design and consideration of the lightning protection and grounding of the entire system. For power input and power output, lightning protection of 20Ka level or above is required. For other signal interfaces, such as Ethernet port and signal port, lightning protection is also required. This allows the entire system to work stably and long-term outdoors.
![](https://edgewaretech.com/wp-content/uploads/2024/07/Enhanced-Lock.webp)
Enhanced Security
When the Outdoor Cabinet of UPS for security cameras is deployed outdoors, many sites are located in remote areas, so the batteries in the cabinet are easily stolen. Customers lose batteries and reduce the reliability of the entire network. Based on this problem, we added a remote control lock that can only be opened from the software platform. The lock is hidden inside the cabinet and cannot be opened by force from outside the cabinet.
![](https://edgewaretech.com/wp-content/uploads/2024/07/UPS-for-Security-Cameras-Power-Input-and-Output-Protection.webp)
Complete Input and Output Protection
When the Outdoor Cabinet of UPS for security cameras is deployed, the system’s power grid input and load output will inevitably encounter problems such as overvoltage, overcurrent, and overload. As a robust and reliable system, it needs to include comprehensive protection. Our design includes input overvoltage, overcurrent, and undervoltage protection. For the load, we also set short circuit, overvoltage, undervoltage, overcurrent, and overtemperature protection.
![](https://edgewaretech.com/wp-content/uploads/2024/07/Cooling-Program-of-UPS-for-Securit-Cameras.webp)
High Efficiency FAN Control Algorithm
Outdoor Cabinet of UPS for security cameras is based on FAN heat dissipation. We hope to extend the life of the fan as much as possible while ensuring the heat dissipation effect of the whole machine, so we designed a cooling algorithm for this scenario. At the same time, we designed a FAN opening and closing algorithm based on dehumidification for scenarios in high humidity environments.
![](https://edgewaretech.com/wp-content/uploads/2024/07/battery-for-outdoor-UPS-for-CCTV-Camera.webp)
High Temperature Resistant Long Life Battery
The most vulnerable and core component of the UPS for security cameras outdoor cabinet is the battery. The battery must be resistant to high temperatures and have a long life. Lithium batteries usually meet these characteristics. Lead-acid batteries are not suitable for outdoor high-temperature environments.
![](https://edgewaretech.com/wp-content/uploads/2024/07/Power-over-Ethernet-for-Outdoor-UPS.webp)
POE+/POE++
The best power supply for CCTV cameras is POE, which fully guarantees the reliability of the system and reduces the complexity of the entire network. Outdoor UPS for security cameras must include POE+ (802.3at) and POE++ (802.3bt) functions, so that a single system can power the entire CCTV camera system. High-definition cameras and those with advanced features such as PTZ (Pan-Tilt-Zoom) may demand higher power, making POE++ (802.3bt) an essential feature.
![](https://edgewaretech.com/wp-content/uploads/2024/07/remote-monitoring-and-management-for-outdoor-UPS-for-CCTV-camera.webp)
Remote Monitoring and Management
UPS for security cameras are deployed in remote areas, and the maintenance cost is extremely high. When the number of sites increases, it will be difficult to know the working status of the sites without a complete remote monitoring and management software platform. When a site has problems, it will cause multiple site maintenance, greatly increasing the maintenance cost of the entire network.
Dimension of Edge Equaiton Lite U300
![](https://edgewaretech.com/wp-content/uploads/2024/07/UPS-for-Security-Cameras-front-1200x1200.webp)
![](https://edgewaretech.com/wp-content/uploads/2022/01/IMG_3320-1200x800.jpg)
![](https://edgewaretech.com/wp-content/uploads/2021/11/Dimension.png)
![](https://edgewaretech.com/wp-content/uploads/2021/11/底部-1200x334.png)
Items | Specification |
Dimension Outside | 400mm*235mm*630mm(W*D*H) |
Dimension Inside | 300mm*210mm*530mm(W*D*H) |
Cabinet Material | 304 Stainless Steel (SUS304) Or Galvanized Steel |
Ingress Protection | IP55 |
Weight | 22kg(Will have difference based on configuration ) |
Please note that the above specifications are for standard models. We can also customize them for the customer’s scenarios, expanding or reducing them to meet the customer’s scenario requirements.
Edge Equaiton Lite U300 Application
![](https://edgewaretech.com/wp-content/uploads/2021/11/EEL-Application-1200x717.png)
Outdoor cabinet of UPS for security cameras is designed to be deployed in edge access network CCTV cameras. As a backup power supply for security cameras, it integrates UPS, lightning protection, layer 2 POE switch, battery and other components to become a one-stop integrated deployment device. Aiming at the common pain points of edge network deployment, the product includes the following main components:
Industrial grade layer2 POE+/POE++ switch (6 Ports 802.3at 30W, 2 Ports 802.3bt 110W)
Industrial grade 300W DC-UPS
48V10Ah lithium battery (2-4 hours system autonomy), can be customized to 20AH, 30AH.
Software system for remote management and monitoring
Surge protection design
System Architecture
![](https://edgewaretech.com/wp-content/uploads/2021/11/Edge-Equation-Lite-U300-Architecture-1.jpg)
Edge Equation Lite U300 Architecture
The Edge Equation Lite U300 outdoor cabinet of UPS for security cameras is a product developed by Edgeware based on the all-in-one design concept. Each functional unit of the product is independent and slot-based. All slots are connected to the backplane, thus avoiding the complex wiring inside the general outdoor power system and the high difficulty of site integration. The equipment mainly has the following units:
PWU Slot
The PWU Slot contains a 300W DC-UPS and Surge Protection Control Board. It becomes the power supply of the entire system and has strong outdoor lightning protection capabilities.
MCU Slot
The MCU Slot has a control board and a programmable control unit for the entire system. It mainly collects control and monitoring information of key components of the whole machine and reports to the software platform. Customized control logic can also be implemented, and we can develop customized development for customers case by case.
SPP Slot
The SPP Slot is a power distribution unit that distributes DC48V, DC24V, and DC12V to customer devices in each slot.
BTU Slot The BTU Slot contains a lithium battery, providing backup power for the entire system. INV Slot INV Slot features 4 AC Outputs, providing AC power supply to the load, this slot typically will not provide, only customer by request.
Internal Funciton Units
![](https://edgewaretech.com/wp-content/uploads/2021/11/Edge-Equation-Lite-U300-Configure-1-1.jpg)
![](https://edgewaretech.com/wp-content/uploads/2021/11/Edge-Equation-Lite-U300-Configure-2.jpg)
Edge Equation Lite U300 Internal Function Units
Please pay attetion that SWU slot has two types of Layer2 POE switch board:
(1) Option1: 8 Ports 802.3at 30W, 2 Ports SFP WAN
(1) Option2: 6 Ports 802.3at 30W, 2Ports 802.3bt 110W, 2 Ports SFP WAN
Slot Based Design
![](https://edgewaretech.com/wp-content/uploads/2021/11/Slot-Design-1-1200x566.png)
![](https://edgewaretech.com/wp-content/uploads/2021/11/Slot-Design-2-1200x394.png)
Edge Equation Lite U300 Internal Function Units
Based on Edgeware’s rich outdoor deployment experience, the Edge Equation Lite U300 outdoor cabinet of UPS for security cameras is designed as a slot-based architecture. All functional slots are connected to a highly integrated Backplane PCB, which simplifies the chaotic cable interconnection inside the traditional outdoor UPS cabinet. Each functional slot can be pulled out and replaced separately, making on-site maintenance and repair easier.
5.1 Site and Cloud Sychronization and Visuallization
Site and Cloud Sychronization and Visualization
![](https://edgewaretech.com/wp-content/uploads/2021/11/Architecture-1200x528.png)
Site and Cloud Sychronization and Visualiation
Edge Equation Lite U300 is not only a UPS of security cameras. It has a built-in Edge Control unit in MCU slot to monitor and manage the operation of the entire system. It is synchronized to the software platform to achieve both Edge and Cloud visualization and synchronization. In this way, management and monitoring can be achieved locally at the site and on the cloud software platform. Especially when the site loses connection from cloud software, the site can still continue to operate based on the management and judgment of the Edge Control unit without relying on the calculation and management of the software platform.
PWU Slot UPS Remote Monitoring and Management
5.2 UPS Remote Monitoring and Managemenet
![](https://edgewaretech.com/wp-content/uploads/2021/11/Outdoor-UPS-Cabinet-Remote-Monitoring-1200x655.png)
UPS Remote Monitoring
![](https://edgewaretech.com/wp-content/uploads/2021/11/Outdoor-UPS-Remote-Reset-1200x605.png)
UPS in PWU Remote Reset
Edge Equation Lite U300 as one UPS for security cameras are usually deployed in remote areas. Controlling the operating status of the UPS, the online status of the mains, and other key information are crucial to the operation and maintenance of the entire network. Therefore, the key information of the UPS system in PWU slot will be collected by the MCU unit in the system and reported to the software platform.
5.4 MCU Slot Can Work as Router Support 4G/5G/GPS/WIFI and VPN
MCU Slot Can Work as Layer 3 Router Support4G/5G/GPS/WIFI and VPN
![](https://edgewaretech.com/wp-content/uploads/2021/11/Embedd-MCU-in-outdoor-UPS-cabinet-1200x601.png)
Optional Function in MCU Slot
![](https://edgewaretech.com/wp-content/uploads/2021/11/VPN-1200x656.png)
MCU Slot as a Router Has VPN Functions
The MCU slot has built-in 4G/5G/WIFI/GPS functions, and customers can choose these components according to their needs. The MCU slot itself acts as a router and can provide general routing functions, ISIS, OSPF and other routing protocols. It also has various mainstream VPN functions, such as IP-SECVPN, L2TP VPN.
SPP Slot Provides Different Voltage Options
![](https://edgewaretech.com/wp-content/uploads/2021/11/Outdoor-UPS-Cabinet-SPP-1200x564.png)
Provide DC48V/DC12V/DC24V to Cover Most Scenarios
The system provides DC48V, DC12V, and DC24V voltages to different devices. For example, general POE Switch and Layer 3 Router use DC48V, while devices such as GPON ONT use DC12V, and satellite routers generally use DC24V. Because the Edge Equation Lite outdoor UPS cabinet provides a variety of voltage options, it can cover most of your scenarios.
Compelet POE Options for Security Cameras Scenario
![](https://edgewaretech.com/wp-content/uploads/2021/11/POE-on-Outdoor-UPS-Cabinet-1200x598.png)
802.3at and 802.3bt POE switch for SWU Slot Both Available
For video surveillance scenario, different cameras have different requirements for POE. Considering this factor, we designed two POE switch boards for the system. One supports 2-port 802.3bt 110W and 6-port 802.3at 30W. The other supports 8-port 802.3at 30W. Customers can configure according to their needs.
Remote Reset of POE Helps Fixing Camera Freeze
![](https://edgewaretech.com/wp-content/uploads/2021/11/POE-Remote-Reset-1200x582.png)
POE Remote Reset
All POE ports can be remotely reset through the software platform to help customers solve simple problems such as camera freeze.
Battery Management System(BMS)
![](https://edgewaretech.com/wp-content/uploads/2021/11/Outdoor-UPS-Cabinet-bttery-BMS-1200x682.png)
Battery Management System
Outdoor UPS cabinet of UPS for security cameras is usually deployed in remote outdoor areas, and the maintenance cost is relatively high. The battery status and service life will largely cause on-site maintenance and repair. Therefore, the built-in battery of Edge Equation Lite is equipped with Battery Management System (BMS). BMS collects key parameters such as battery voltage, current, capacity, number of cycles, etc. and synchronizes them to the software platform for remote management and maintenance by operation and maintenance engineers.
Remote Control Lock for Enhanced Security
![](https://edgewaretech.com/wp-content/uploads/2021/11/Remote-Control-Door-for-Outdoor-Telecom-Cabinet.png)
Remote Control Lock
System is equipped with remote control door lock.The picture above shows Edgeware’s remote control door lock. Essentially, it is a remote control access control system. When the software platform executes the lock command, the cabinet door is locked. When the software platform executes the unlock command, the cabinet door is unlocked. In the software platform, all operation records will be stored, so that all actions can be easily traced.
If you have more security requirements, you can refer to our technical article to know more details what Edgeware can offer:
https://edgewaretech.com/how-to-secure-outdoor-telecom-cabinet/.html
IoT Power Backup Supply and Edge Control Site
![](https://edgewaretech.com/wp-content/uploads/2021/11/IOT-Outdoor-UPS-.png)
IOT Sensor Integration
The network location of UPS of security cameras is often in the edge network. This location is often not a single camera deployment location, but also a location for various sensors, various control devices, and industrial control scenarios. Therefore, Edge Equation Lite U300 is also designed as an IoT edge site for integrating IoT sensors.
Specifications
General Applications | Model | Edge Equation Lite U300 |
Version | V02R2401U | |
Application Scenarios | Outdoor Cabinet, Outdoor Power Solution, Outdoor UPS Cabinet, Power Storage Cabinet, Video Surveillance Cabinet, CCTV Power Cabinet , Satellite Power Cabinet, Satellite Site Power Backup, Outdoor AI Site Power Backup, Outdoor Edge Computing Power Backup, Smart City Power Solution, IoT Aggregation Site Power Backup, Telecom Outdoor Site, Remote Education Outdoor Site | |
Cabinet Basic Specification | Cabinet Material | 304 Stainless Steel(SUS 3040 |
Ingress Protection | IP55 | |
Cooling | Dual FAN System Speed Adjustable by MCU Slot | |
System Power Specification | Rated Input Voltage | 220V/110VAC |
Max Input Current | 10A | |
UPS Rated Power | 300W | |
System Main Voltage | DC48V | |
Other Voltage Options | DC12V/DC24V | |
AC Power Output | 220V/110VAC(Only when configured with INV Slot) | |
Battery | Battery Type Supported | Lithium Battery/AGM/GEL |
Battery Unit Capacity (BTU) | 48V10AH Lithium Battery Default Can be customized to be bigger. | |
System Monitoring | Power System Monitoring | UPS, |
Protection System Monitoring | Surge Suppressor | |
Environment Control | FAN Control based on Temperature | |
Cabinet Defending | Cabinet Door Defend Defend Alarm | |
Battery Management | Battery Management System | |
Software Platform | Software Platform | Edgeware Convergence Software Platform |