Outdoor POE UPS with 4G Node-Red Router Smart Node-Edge Span U60-LTEP
Outdoor POE UPS , 4G Industrial Router with Node-Red Edge Control , Lithium Battery All in One IP65 Smart Node
Edge Span U60 LTEP Smart Node
Edge Span U60-LTEP is an IP65/NEMA 4 level outdoor POE UPS designed for edge network scenarios. It is a small and highly integrated system. By integrating UPS, lithium battery, and industrial 4G Node-Red router into a small IP65 system, customers can easily implement scenarios such as CCTV camera power backup and aggregation, WIFI AP rural area deployment, and IoT sensors edge deployment. The main components and specifications of Edge Span U60-LTEP are as follows:
- Industrial level 300W UPS
- Industrial 4G Node-Red Router with 3*802.3at(PoE+) Ports
- 802.3bt 110w port is optional
- WIFI optional
- GPS optional
- 2*RS485,1*RS232,1*DI,DO
- 480Wh(48V10AH)Lithium Battery
Product Video
Features of POE UPS Edge Span U60-LTEP
IP65/NEMA 4
POE UPS Edge Span U60-LTEP provides full system IP65/NEMA 4 level ingress protection, making it completely suitable for outdoor real area deployment.
Outdoor Optimized Rugged Design
System embedded in a cast aluminum shell that has an IK08 protection rating which is optimized for outdoor deployment.
No Rust for Long Term Operation
With a rust-proof design, Edge Span UU60 LTEP POE UPS ensures that the entire system is completely free of rust and can operate stably for a long time.
Surge Protection
System with comprehensive lightning protection design which is dedicated to outdoor environment.
FAN Less Dissipation
POE UPS is designed for outdoor edge network deployment. Fan cooling will increase the probability of replacing fans at the site, thereby increasing maintenance costs. We believe that fanless design with natural heat dissipation is the best cooling method for edge network equipment.
High Temperature Resistant Long Life Battery
High temperature resistant lithium batteries are designed to be embedded in the POE UPS system to ensure that the entire system can adapt to high temperature outdoor environments.
Node-Red Ready
Because the POE UPS is embedded with our 4G Node-red router. The latest Node-Red version is embedded, provide pre-integrate customer node-red firmware service. Edgeware also provides customized program for customer’s scenario.
OPEN-WRT
4G node-red router in POE UPS is based on mature OPEN-WRT architecture for the 4G router function. With mature wireless functions that has been used by Edgeware outdoor scenarios.
Complete Protocol for Industrial Router
The node-red router embedded in POE UPS is designed based on the industrial router architecture. Supports a full range of networ protocols. For example, it can support ISIS and OSPF as a Layer 3 access router node.
Complete VPN Protocols Supported
System supports mainstream VPN technologies such as OPEN-VPN, IPSEC VPN, GRE, PPTP, and L2TP. So customer can use VPN to simplify their internal network IP planning and ensure the network secruity.
POE+/POE++Functions
The 4G node-red router in POE UPS has PoE+ Ports , the total PoE Power is 90W. Can also add one PoE++ 802.3bt port which can reach 110W.
Industrial and Control Interface
System supports 2 RS485, 1 RS232, 1 DI, and 1 DO. Modbus can be run on RS485. Therefore, customers can build their edge control site with Edge Span U60 LTEP to control devices such as battery BMS, solar controller, IoT Sensors, etc.
4G Backhaul Capability
4G module can be configured with CAT1, CAT4, CAT6, CAT12, etc. The wireless module can be used as the primary and backup for the uplink port of the device.
WIFI Supported
System has 802.11n WIFI function as optional . It can provide small amount of WIFI access for users in edge network scenarios. It can also facilitate engineers to access WIFI for configuration and maintenance.
GPS Supported
EX900 Node-red Router supports GPS function. It also has GPS tracking function, which can report coordinates, heading, speed, altitude and other information. It can be deployed in scenarios where tracking is required. It can also be used only for site location information.
GPS information can be managed by Node-red.
SNMP Supported
SNMP is a common protocol used by large enterprises, governments, and telecom operators. General node-red gateways usually lack SNMP protocol, but EX900 has a built-in complete SNMP protocol, which can be easily managed by the customer’s SNMP OSS in large projects, such as Zabbix, Solar Wind, etc.
Thingsboard Supported
Edgeware is a certified distributor of thingsboard. Our product fully supports the thingsboard software platform. The Edgeware development team also has extensive thingsboard development experience and can help customers customize and implement the functions they need.
PRTG Supported
POE router Edge Span U60 LTEP also supports reporting device monitoring and management information to the PRTG software platform.
Edge Span U60-LTEP POE UPS Main Specification
- Industrial level 300W UPS
- Industrial 4G Node-Red Router with 3*802.3at(PoE+) ports , can configure one port as 802.3bt PoE 110W.
- 4G Node-Red Router with 4*1000Base-T LAN ports and 1*1000Base-T/1000Base-X combo WAN port
- 4G Node-Red Router with Node-Red version embedded and control the whole system with UPS, Battery and in enclosure environment. Also can use RS485 RS232 DI DO to integrate IoT sensors thrid party.
- 4G Node-Red Router can perform SNMP management integration of the the devices in its LAN.
- Lithium battery 10AH(48V)with 480Wh power that can support the whole system to run for 2 hours – 4 hours without power grid(Also have 5AH(48V) 240Wh version for cost down request ). Is a desgined for power backup for CCTV camera, we can also cutomize the battery capacity.
- Totally sealed design reaches IP65/NEMA 4 ingress protection,dust and water penetration-free system
- Configured with comprehensive system monitoring for in enclosure environment, AC input voltage current power, battery management, UPS management, POE switch management.
- 20Ka surge protection
- 4G module CAT1/CAT4/CAT6/CAT12 can be embedded, GPS and WIFI function as optional.
Dimension and Weight
Edge Span U60-LTEP POE UPS system’s dimension and weight as followings:
- The weight of the whole system is 12.5kg (with 300 watt battery backup installed)
- Dimension of the whole system: 351mm*295.5mm*150mm (W*H*D)
Installation of UPS for CCTV System
Pole Mounting Installation
Edge Span U60-LTEP POE UPS supports pole mounting installation
Wall Mounting Installation
Edge Span U60-LTEP POE UPS supports wall mounting installation
Application of Edge Span U60-LTEP
CCTV Camera Site That Requires 4G/5G
Edge Span U60-LTEP POE UPS is very suitable for outdoor deployment of 1-3 CCTV cameras. The all-in-one design can help customers quickly achieve site integration and delivery.
WIFI AP Access Using 4G/5G Backhaul
For sites with low number of access and management requirements, the WIFI function of Edge Span U60-LTEP can be used directly. For sites with high number of access and management requirements, WIFI AP can be installed.
Smart City Sensor Site
Edge Span U60-LTEP POE UPS can provide energy and backhaul for smart city sensor sites. If customers need to add special requirements such as DC12V, DC24V, RS485 interface, etc., we can customize it according to the scenario.
IoT Edge Control Site
Edge Span U60-LTEP POE UPS implements power backup supply and edge control functions for IoT edge access sites and uses 4G backhaul.
Harsh Envrionment Monitoring and Control
Because of the rugged design of Edge Span U60 LTEP, it is very suitable for deployment in industrial and mining scenarios to achieve industrial control and industrial data collection. Combined with Node-red, we can easily customize various scenarios for customers.
Main Function Units
As shown in the figure above, this is the configuration of POE UPS Edge Span U60-LTEP
IoT Sensor Edge Control and Computing
Edge Span U60-4GP POE UPS can be used as an integrator for various IoT sensors or control systems in edge networks due to its all-in-one features and node-red support. Combined with Edgeware’s convergence software platform, IoT edge network one-stop delivery can be easily achieved.
4G and WAN Port Back Each Other
Edge Span U60-LTEP PoE UPS is designed with the reliability of the overall network backhaul of the system in mind. It can set up a master-slave connection between 4G and WAN port. When the master link is down, the slave link swaps as the main link. When the master link is back, the traffic goes back to the main link.
Main Steam VPN Supported for Enhanced Security
Edge Span U60 LTEP supports mainstream VPN technology, making IP address planning for edge deployment clearer and easier, and also enables direct login for edge site management, making management more convenient. More importantly, it protects data security.
UPS Remote Monitoring and Management
The UPS system is the core component of the Edge Span U60-LTEP PoE UPS. Its stable operation is crucial to the entire system. The UPS operating status, input and output parameters, and various alarm conditions can be monitored and managed. This allows maintenance personnel to know the working status of the UPS system remotely by monitoring the operating parameters.
Battery Management System
The life and operation of the battery are also very important for the operation of Edge Span U60-LTEP, especially when there are a large number of sites and power outages are very frequent. After 5-10 years of site deployment, it is inevitable that some batteries will need to be replaced because they have exceeded the usage limit. At this time, if there is a battery management system in the Edge Span U60-LTEP, its status can be remotely monitored to understand the number of charge and discharge cycles to determine the maintenance plan. The built-in BMS of Edge Span U60 can provide you with various information such as battery voltage, current, power, power, number of cycles, single cell voltage, cell voltage balance, etc. to help you understand its operation status through our software platform at the maintenance center.
Envrionment Management
The deployment environment of Edge Span U60-LTEP is relatively complex, so Edge Span has built-in temperature and humidity sensors that can synchronize real-time conditions to the software platform.
POE Switch Management and Control
The POE switch board embedded in the system will be managed by our software platform. The port status can be remotely managed through the software platform. The POE port can be remotely controlled to shut down and restart. Based on this function, the CCTV system can be restarted remotely to solve the camera freeze problem in most cases. Please pay attetion , in Edge Span U60-LTEP PoE port also can be controlled by Node-Red,so the control can merge into Node-red code to impeletement the control logic with other devices or trigger condition.
Third Party Software Platform Integration
Although Edgeware has its own software platform, customers often have their own considerations for the management of the entire network and have their own management system or OSS. POE UPS is only part of customer network.Therefore, Edge Span can also provide services that are integrated into your third-party platform.
PRTG Software Platform
https://www.paessler.com/
Thingsboard Software Platform
https://thingsboard.io/
Customers have various ways of managing UPS for CCTV system, so we also provide MQTT and SNMP protocols to connect with customers’ software platforms.
Customization Development
We also provide customers with customized development based on Edge Span U60-LTEP POE UPS, which includes the following services:
(1) Embed the customer’s equipment in Edge Span U60 enclosure. For example, we once helped a customer design an Ericsson router to replace Edgeware’s 4G Node-Red router to achieve semi-customization of the entire system.
(2) Increase or decrease the battery capacity
(3) Customize the control logic of the whole system.
(4) Program Node-Red for customer scenario
(5) Program and integrate thrid party IoT sensors
(6) Provide sensors and devices of Edgeware help customer build the whole scenario
Specifications
|
Edge Span U60-4GP POE System General Specifications |
|
|
Dimension |
W*H*D 295mm*355mm*150mm |
|
Weight |
12.5kg(with all system） |
|
Material |
Aluminum |
|
Ingress Protection |
IP65 |
|
Heat Dissipation |
No fan design, natural heat dissipation |
|
System Operating Temperature |
-20~+75°C, 5%~90% RH Non condensing |
|
DC-UPS |
Rated Power 300W 48V DC UPS System( Can change to 100 watt ups battery backup) Input 110V/220V 50/60Hz Output 42.00-58.00VDC |
|
Battery |
48V10AH Lithium Battery with BMS |
|
Surge Suppression |
20KA |
|
Protection |
Remote control power on and off from Edgeware convergence platform 10A 110v/220v Leakage Protection Overvoltage Protection Under Voltage Protection Overcurrent Protection Short circuit Protection Lightning Protection |
|
Network Module: |
Industrial 4g Node-Red POE Router GE Downlink: 3*10/100/1000M Base-T ports GE Uplink : 1 *10/100/1000M Base-X or Base T port |
|
PoE: |
3*POE/POE+ Ports with 30W max power per port Or configure one of the three ports to be 1*POE++ 802.3bt with 110W Total power should not be bigger 250W |
|
Output Power |
DC12V DC48 can be customized based on requirement |
|
Output and Input Signal |
External Sensor Integration can be customized based on requirement |
|
System Monitoring and Management |
Work with Edgeware Convergence software platform to perform system monitoring and management |
|
Environment Monitoring |
System temperature, humidity. Box open and close status |
|
UPS Status Monitoring |
Input Voltage, Output Voltage Input/Output Power，Rated Power Battery Charge/Discharge Current Input Current, Load Current Normal, Power Grid Off, Fault |
|
AC Power Input Monitoring |
Remote Control Failure Status Voltage Current Undervoltage Overvoltage Overcurrent Current leakage |
|
Battery Status Monitoring |
Battery voltage , current, remaining capacity, temperature Battery working status, battery charge and discharge current Battery health estimation( Battery life time estimation ) |
|
External Light Control |
External light controlt |
|
Typical Application Scenario |
cctv cabinet,solar cabinet, solar termination cabinet, Solar Controller enclosure, video surveillance cabinet, IoT Cabinet, IoT device enclosure, IoT enclosures Smart City, Industrial Control, video surveillance, Telecom |
Layer3 POE Router Module Embedded Specifications | |
MOBILE | |
Status | Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID |
SMS | SMS status, SMS configuration, |
Black/White list | Operator black/white list |
Band management | Band lock, Used band status display |
APN | Auto APN |
Bridge | Direct connection (bridge) between mobile ISP and device on LAN |
Passthrough | Router assigns its mobile WAN IP address to another device on LAN |
Dual PDN | Possibility to use different PDNs for dual network access and services (not available in standard FW) |
NETWORK | |
Network protocols | TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPnP, SSH, DHCP, Telnet client, SNMP |
Connection monitoring | TCP-Ping Reboot, Periodic Reboot, LCP and ICMP for link inspection |
Firewall | Port forward, traffic rules, custom rules |
DHCP | Static and dynamic IP allocation, DHCP Relay |
QoS | Speed control of physical interface: WAN, LAN, Modem |
DDNS | 7 service providers, others can be configured manually |
Network backup | VRRP, Mobile, Wired and each of which can be used as backup, using automatic Failover |
SECURITY
Authentication | Pre-shared key, digital certificates, X.509 certificates |
Firewall | Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T |
Attack prevention | DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, NULL flags, FIN scan attacks) |
VLAN | Port and tag based VLAN separation |
Mobile quota control | Set up custom data limits for the SIM card |
WEB filter | Blacklist for blocking out unwanted websites, whitelist for specifying allowed sites only |
Access control | Flexible access control of TCP, UDP, ICMP packets, MAC address filter. |
OpenVPN | Multiple clients and server can be running simultaneously, 12 encryption methods |
OpenVPN Encryption | DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC |
IPsec | IKEv1, IKEv2, supports up to 4 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256) |
GRE | GRE tunnel |
PPTP, L2TP | Client/Server services can run simultaneously |
MONITORING & MANAGEMENT
WEB UI | HTTP/HTTPS, status, configuration, FW update, CLI ,troubleshoot, event log, system log, kernel log |
SSH | SSH (v1, v2) |
SMS | SMS status, SMS configuration, send/read SMS via HTTP POST/GET |
SNMP | SNMP (v1, v2, v3), SNMP trap |
