Outdoor UPS for CCTV Camera Edge Span U60 LSP-8
300W UPS, POE Switch and Battery All in One Outdoor UPS System
![](https://edgewaretech.com/wp-content/uploads/2024/07/Outdoor-UPS.webp)
What is Outdoor UPS for CCTV Camera
Outdoor UPS for CCTV is a CCTV camera power backup specially designed for outdoor deployment. Therefore, the power supply network in many countries in the world is not stable, and the frequent network interruptions will pose a major challenge to the continuity and reliability of CCTV camera system monitoring. Therefore, equipping the site with outdoor UPS for CCTV camera can greatly improve the reliability of CCTV camera system. Because Outdoor UPS for CCTV camera is deployed in outdoor environment, it is different from general indoor UPS system. Outdoor UPS for CCTV camera needs to have rugged industrial design, rust-free, IP65, high reliability, natural heat dissipation, maintenance-free and other characteristics.
Product Video
Features of UPS for CCTV Camera
![](https://edgewaretech.com/wp-content/uploads/2024/07/IP65.webp)
IP65/NEMA4X
Outdoor UPS for CCTV camera should be designed with IP65 or higher level ingress protection to adapt to different deployment environments. Because as a UPS for surveillance system, it may be deployed in some environments such as a lot of dust or highly humid and high-salinity air. Ingress protection below IP65/NEMA4X cannot provide sufficient protection for outdoor UPS for CCTV camera, thus affecting the availability of equipment inside the enclosure.。
![](https://edgewaretech.com/wp-content/uploads/2024/07/rugged.webp)
Rugged Design
Outdoor UPS for CCTV must withstand harsh environmental conditions, such as extreme temperatures, humidity, dust, and even potential physical impacts. A rugged design ensures that the UPS for surveillance system remains reliable and functional, maintaining power to the CCTV cameras even in adverse situations.
![](https://edgewaretech.com/wp-content/uploads/2024/07/Power-over-Ethernet-for-Outdoor-UPS.webp)
POE+/POE++
The best power supply for CCTV cameras is POE, which fully guarantees the reliability of the system and reduces the complexity of the entire network. Outdoor UPS for CCTV cameras must include POE+ (802.3at) and POE++ (802.3bt) functions, so that a single system can power the entire CCTV camera system. High-definition cameras and those with advanced features such as PTZ (Pan-Tilt-Zoom) may demand higher power, making POE++ (802.3bt) an essential feature.
![](https://edgewaretech.com/wp-content/uploads/2024/07/Lightning-Protection-for-Outdoor-UPS-CCTV-Camera.webp)
Lightning Protection
Another major challenge in the outdoor environment is lightning protection. Outdoor UPS for CCTV camera requires a comprehensive design and consideration of the lightning protection and grounding of the entire system. For power input and power output, lightning protection of 20Ka level or above is required. For other signal interfaces, such as Ethernet port and signal port, lightning protection is also required. This allows the entire system to work stably and long-term outdoors.
![](https://edgewaretech.com/wp-content/uploads/2024/07/Natural-Heat-Dissipation.webp)
Natural Heat Dissipation
Natural heat dissipation is very important for outdoor UPS for CCTV camera. Because most UPS for CCTV camera systems are deployed outdoors, and the maintenance cost of outdoor environment is very high. UPS systems based on FAN cooling are mechanical parts, which are easy to be damaged, resulting in high maintenance costs at the site. Outdoor UPS systems based on Natural heat dissipation can be maintenance-free for a long time, thus greatly reducing the maintenance cost at the site and saving OPEX.
![](https://edgewaretech.com/wp-content/uploads/2024/07/battery-for-outdoor-UPS-for-CCTV-Camera.webp)
High Temperature Resistant Long Life Battery
The most vulnerable and core component of the Outdoor UPS for CCTV camera power backup is the battery. The battery must be resistant to high temperatures and have a long life. Lithium batteries usually meet these characteristics. Lead-acid batteries are not suitable for outdoor high-temperature environments.
Edge Span U60 LSP-8 Outdoor UPS for CCTV Camera
![](https://edgewaretech.com/wp-content/uploads/2024/07/Outdoor-UPS-1.webp)
- Industrial level 300W UPS
- Industrial level manageable layer 2 POE Switch(8 ports downlink with 2ports 802.3bt 110W, 6 ports 802.3at 30W, 2 ports uplink can be configured 1000Base-x or 1000Base-T)
- lithium battery with high temperature tolerance. With 480Wh power that can support the whole system to run for 2 hours – 4 hours without power grid
- IP65/NEMA4X ingress protection
- 20Ka surge protection
Installation of Outdoor UPS for CCTV Camera
![](https://edgewaretech.com/wp-content/uploads/2024/07/Outdoor-UPS-Pole-Mounting.webp)
Pole Mounting Installation
Edge Span U60 outdoor UPS for CCTV camera can support pole mounting installation
![](https://edgewaretech.com/wp-content/uploads/2024/07/Outdoor-UPS-Wall-Mounting.webp)
Wall Mounting Installation
Edge Span U60 outdoor UPS for CCTV camera can support wall mounting installation
Advantages of Outdoor UPS for CCTV Camera to Customers
![](https://edgewaretech.com/wp-content/uploads/2024/07/Outdoor-UPS-All-in-One.webp)
All in One Design For Eaiser Deployment
The outdoor UPS for CCTV camera designed based on the All in One concept of our products integrates all the functions required for CCTV power back up supply into an outdoor enclosure. Customers do not need to purchase outdoor cabinets based on video surveillance scenarios, and then purchase UPS, batteries, POE Switch and other equipment separately for on-site assembly. This greatly speeds up the site installation and delivery.
![](https://edgewaretech.com/wp-content/uploads/2024/07/Outdoor-UPS-Plug-and-Play.webp)
Plug and Play
Edge Span series outdoor UPS for CCTV camera has completed the interconnection and testing of internal electrical, battery, and UPS components before leaving the factory. After arriving at the site, customers do not need to connect cables between switches, UPS, batteries and other components like traditional outdoor cabinets, and can directly plug and play. This design greatly simplifies the installation complexity, speeds up project delivery time, and reduces the cost of on-site installation personnel.
![](https://edgewaretech.com/wp-content/uploads/2024/07/Outdoor-UPS-CCTV-Camera-durable.webp)
Durable with Long Term Maintenance Free
Edge Span series outdoor UPS for CCTV camera is designed and manufactured based on industrial level requirements, focusing on long-term durability and high reliability of equipment. The equipment can build a long-term maintenance free network for customers.
![](https://edgewaretech.com/wp-content/uploads/2024/07/Outdoor-UPS-CCTV-Camera-to-Power-UP-Cameras.webp)
One Enclosure Power Up all Types of Cameras
The best power supply for CCTV cameras is POE, which fully guarantees the reliability of the system and reduces the complexity of the entire network. Outdoor UPS for CCTV cameras must include POE+ (802.3at) and POE++ (802.3bt) functions, so that a single system can power the entire CCTV camera system. High-definition cameras and those with advanced features such as PTZ (Pan-Tilt-Zoom) may demand higher power, making POE++ (802.3bt) an essential feature.
Specifications of Outdoor UPS for CCTV Camera
Edge Span U60 LSP-8 All in One Outdoor UPS for CCTV Camera Specification | |
Dimension | W*H*D 295mm*355mm*150mm |
Weight | 12.5kg(with all system) |
Material | Aluminum |
Ingress Protection | IP65 |
Heat Dissipation | No fan design, natural heat dissipation |
System Operating Temperature | -20~+75°C, 5%~90% RH Non condensing |
DC-UPS | Rated Power 300W Input 110V/220V 50/60Hz Output 42.00-58.00VDC |
Battery | 48V10AH Lithium Battery with BMS |
Surge Suppression | 20KA |
Protection | Remote control power on and off from Edgeware convergence platform 10A 110v/220v Leakage Protection Overvoltage Protection Under Voltage Protection Overcurrent Protection Short circuit Protection Lightning Protection |
Network Module: | GE Downlink: 8*10/100/1000M Base-T ports GE Uplink : 2 *10/100/1000M Base-X or Base T port Layer 2 POE switch module manageable |
PoE: | 6*POE/POE+ Ports with 150W max power 2*POE++ 802.3bt with 110W Total power should not be bigger 250W |
Output Power | DC12V DC48 can be customized based on requirement |
Output and Input Signal | External Sensor Integration can be customized based on requirement |
System Monitoring and Management | Work with Edgeware Convergence software platform to perform system monitoring and management |
Environment Monitoring | System temperature, humidity. Box open and close status |
UPS Status Monitoring | Input Voltage, Output Voltage Input/Output Power,Rated Power Battery Charge/Discharge Current Input Current, Load Current Normal, Power Grid Off, Fault |
AC Power Input Monitoring | Remote Control Failure Status Voltage Current Undervoltage Overvoltage Overcurrent Current leakage |
Battery Status Monitoring | Battery voltage , current, remaining capacity, temperature Battery working status, battery charge and discharge current Battery health estimation( Battery life time estimation ) |
External Light Control | External light controlt |
Typical Application Scenario | cctv cabinet,solar cabinet, solar termination cabinet, Solar Controller enclosure, video surveillance cabinet, IoT Cabinet, IoT device enclosure, IoT enclosures Smart City, Industrial Control, video surveillance, Telecom |
Network Module Switching Capacity | 128Gbps |
MAC | 8K |
Network Module Protocol Supported | 4K VLAN based on port, IEEE802.1q VLAN based on the protocol, VLAN based on MAC QinQ configuration, Port configuration of Access, Trunk, Hybrid LACP, Static aggregation, Max 3 aggregation groups and 8 ports per group. STP (IEEE802.1d),RSTP (IEEE802.1w),MSTP (IEEE802.1s) MLD Snooping v1/v2,Multicast VLAN IGMP Snooping v1/v2, Max 1024 multicast groups, Fast log out Bidirectional data mirroring based on port Flow-based Rate Limiting Flow-based Packet Filtering 8*Output queues of each port 802.1p/DSCP priority mapping Diff-Serv QoS,Priority Mark/Remark Queue Scheduling Algorithm (SP, WRR,) Port-based Issuing ACL,ACL based on port and VLAN L2 to L4 packet filtering, matching first 80 bytes message. Provide ACL based on MAC, Destination MAC address, IP Source, Destination IP, IP Protocol Type, TCP/UDP Port, TCP/UDP Port Range, and VLAN, etc IP-MAC-VLAN-Port binding ARP inspection,Anti-DoS attack AAA & RADIUS,MAC learning limit Mac black holes,IP source protection IEEE802.1X & MAC address authentication Broadcast storm control,Backup for host datum SSH 2.0,SSL,Port isolation,ARP message speed limit User hierarchical management and password protection DHCP Client,DHCP Snooping,DHCP Server,DHCP Relay |