Outdoor UPS for CCTV-Edge Span U1000-LTEP UPS POE Switch LTE Router All in One System
300W UPS,LTE, POE Switch,Battery All in One System Designed for CCTV Scenario
Outdoor UPS for CCTV-Edge Span U1000-LTEP UPS POE Switch LTE Router All in One System
Edge Span U1000-LTEP is an all-in-one outdoor UPS for CCTV that integrates 4G edge control router, WIFI, POE, UPS, Battery, edge computing and control functions. The system is mainly designed for a variety of outdoor scenarios such as video surveillance, outdoor WIFI, remote site coverage, energy network control, industrial network control, smart city, environmental detection, smart agriculture, etc. In conjunction with Edgeware or the customer's third-party IoT sensor, a more comprehensive one-stop solution can be achieved. Edge Span U1000-LTEP has a built-in programmable core, and Edgeware can implement the control, monitoring and management functions required by the customer according to the customer's scenario. The system is generally equipped with 6 ports of 802.3at (POE+), 2 ports of 802.3bt(POE++) 110W which can be configured according to the customer's scenario requirements. Modbus, DC12V/DC48V, DI, DO interfaces are also can be configured.
Product Video
Features of Outdoor UPS for CCTV Edge Span U1000-LTEP
Ingress Protection with IP65/NEMA4X
Edge Span U1000-LTEP outdoor UPS for CCTV has achieved IP65/NEMA4 Ingress Protection, which is very suitable for deployment in extreme environments, such as high humidity and high salinity environments, or deserts and other dusty areas. For less extreme environments, it can also better ensure that the system can work stably and reliably in the long term.
Enclosure with Rugged Design
The highly integrated design of Edge Span U1000-LTEP greatly reduces the dimension of the entire system, which is 200% smaller than that of similar outdoor cabinets with the same functions. It allows 1-2 engineers to complete the pole installation without the need for large equipment such as cranes.
Completely Rust-proof
Edge Span U1000-LTEP outdoor UPS for CCTV is made of cast aluminum, which is strong and rust-proof. It can be deployed in extreme environments such as rainforests, costal, mountainous areas, and deserts for a long time and can operate stably without being affected by the environment and rusting.
Surge Protection
In response to the lightning challenges of outdoor deployment, the entire system has a complete lightning protection design. There is a 20KA level lightning protection for the power input. There is a 6KV level lightning protection for the Ethernet port and signal port. In addition, the complete grounding design of the entire system ensures the stability and reliability of the equipment’s long-term outdoor operation.
All Components Natural Heat Dissipation
The system relies on its own cast aluminum shell to dissipate heat naturally, without mechanical heat dissipation parts such as fans, thus ensuring that the system can better achieve maintenance-free and reliable operation outdoors.
High Temperature Resistant Long Life Battery
Lithium battery is embedded in the system. The lithium battery is designed for the environment of outdoor with high temperature tolerance. In order to better remotely manage the battery status, it has a built-in BMS (Battery Management System), which can effectively monitor the battery voltage, current, capacity, temperature, protection status, cycles, battery cell voltage balance and other key parameters, so that the OAM team can know the battery status on the central software platform.
POE+/POE++
System has a built-in industrial level layer 2 POE switch module to adapt to high temperature working environment. The POE switch module supports 802.3at (30W) and 802.3bt (110W) ports are provided to cover all mainstream POE power supply requirements. The software platform can also remotely control the opening, closing, and restarting of the POE port to remotely restart the POE power-consuming equipment.
Remote Monitoring and Management
All key components of the Edge Span U1000-LTEP outdoor UPS for CCTV are monitored and managed. Key information can be reported to the Edgeware software platform or to a third-party software platform by MQTT.
Industrial UPS for Harsh Environment
Edge Span has built-in an industrial level UPS designed for outdoor high temperature environments. Its small-scale design based on natural heat dissipation can make the entire system small and easy to deploy. The UPS and battery are fully monitored and managed by the software system. Any things happened will be collected by software platform remotely.
4G CAT12 Uplink
Edge Span U1000-LTEP outdoor UPS for CCTV supports CAT12 high-speed LTE backhaul. In some places where there is no optical fiber, 4G backhaul can be relied on.
Smart Breaker for Remote Control
The system is designed with an optional smart breaker that can be remotely turned on via software. Engineers no longer need to go to remote sites to manually turn off or turn on the breaker.
In Enclosure Environment Monitoring
The system monitors the environment in the enclosure in real time, so as to know the ambient temperature and humidity inside the enclosure. At the same time, the temperature of each key component such as battery and UPS is monitored to ensure the stable operation of the entire system.
Outdoor IoT Capability
The system takes into account the outdoor access scenario of IoT. Embedded with programmable core can easily access various IoT sensors. And through Edgeware Convergence software platform can quickly realize scenario-based deployment.
Edge Control and Computing
The system has edge computing and control capabilities. It can conveniently calculate and process data at the edge and execute corresponding logical control without relying on the central software platform. It is convenient to achieve the collaboration between cloud and edge.
Router Embedded
Industrial router embedded to make the whole system as router node. Can configure WAN link and LTE link backup each other for better system availability.
Main Stream VPN Supported
The system supports mainstream VPN technologies such as IP SEC VPN, GRE, L2TP, etc. It is convenient for customers to build a secure network and plan the entire network IP.
Edge Span U1000-LTEP General Specificatgions
- IP65/NEMA4 Waterproof
- W*H*D 371.3mm*450mm*234mm
- 21.5kg
- Aluminum Cast Enclosure Rust-Proof
- Pole or Wall Mounting Installation
- Operating Temperature:-20~+55°C
- Working Humidity:5%~90%
- Power Surge Protection:20Ka
- Worldwide 5G/4G Band Supported
- WIFI Optional
- GPS Optional
- Industrial 4G Edge Control Router Module Embedded
- Industrial Layer2 PoE Switch Module Embedded
- 1*1000Base-X/1000Base-T Combo WAN Port
- 8*1000Base-T LAN Ports
- 6 LAN Ports Support 802.3at POE+
- 2 LAN Ports 802.3bt POE++ 110W
- Industrial Level 300W UPS
- 720Wh 15Ah48V Lithium Battery
- Whole System Monitoring and Management by Software Platform
- RS485/RS232/DI/DO Optional for IoT Sensors
Port Configuration
Installation of the System
Pole Mounting Installation
Edge Span U1000 LTEP support pole mounting installation
Wall Mounting Installation
Edge Span U1000 LTEP support wall mounting installation
Application of Edge Span U1000-LTEP
Edge Span U1000-LTEP outdoor UPS for CCTV is suitable for deployment in outdoor edge networks. It can be used as a node that integrates network, energy, control, and edge computing, greatly optimizing the edge network outdoor deployment scenario and helping customers to implement it in one stop. The downlink device of Edge Span U1000-LTEP can be connected to PoE devices such as CCTV cameras and WIFI APs. It can also be connected to different types of devices such as environmental sensors, industrial controls, and smart cities through IoT or industrial equipment interfaces. For uplink Edge Span U1000-LTEP provides CAT12 LTE or 1000Base-X/1000Base-T WAN interface. Thus forming a one-stop outdoor edge network solution from software to network, energy, and sensor.
Comprehensive Electricity Protection
Edge Span U1000-LTEP is designed with perfect electricity protection for outdoor application . First of all, the lightning protection system is designed with a built-in 20KA level lightning surge suppressor, which not only protects the entire system in outdoor lightning protection, but also simplifies customer installation. In addition, the AC input is designed with under-voltage, over-voltage, over-current protection, and will detect the online status of the power grid, AC input voltage, current, power and other parameters. For UPS output, it is designed with under-voltage, over-voltage, over-current, short circuit, over temperature protection. This makes the entire system reliable and stable when running outdoors.
Smart Breaker for Remote Control
Edge Span U1000-LTEP can monitor and manage smart breakers and report their status to the Edgeware Convergence software platform. When a smart breaker is powered off due to some special reasons such as a sudden high current surge, the NOC OAM engineer can remotely control the breaker to power on through the Convergence software platform.
Smart Breaker for Remote Control
Edge Span U1000-LTEP has a built-in programmable edge computing software core, which can customize computing and control programs and algorithms according to customer scenarios. Most of the control and computing are based on Edge Span as distributed computing and control, so as to better coordinate data, computing and control between the central software platform and the edge network site. At the same time, based on the programmable edge computing core, it is not limited to a standardized model, and can be developed and delivered quickly according to the customer’s scenario.
Maintenance WIFI
Because Edge Span U1000-LTEP is usually hung high on a pole, if it needs to be configured, engineers can try to connect to the reserved maintenance Wifi to access the LAN of Edge Span U1000-LTEP, and then view the entire device and perform configuration work. This will greatly facilitate the debugging and configuration work of on-site engineers. At the same time, for the security of maintenance Wifi, its SSID is generally in a hidden state and will not be broadcast, so ordinary people cannot use it.
Main Uplink and Backup Uplink Backup Eachother
Edge Span U1000-LTEP outdoor UPS for CCTV supports Ethernet fiber uplink and 4G/5G. In actual operation, they can serve as the main and backup links for each other. For example, the usual deployment method is Ethernet Fiber as the main uplink and 4G/5G as the backup link. When the system detects that the main link is down, it switches to the backup link. When the main uplink is restored, the traffic switches back to the main uplink. This greatly enhances the availability of the entire network.
Main Steam VPN Supported for Enhanced Security
Edge Span U1000-LTEP outdoor UPS for CCTV is designed for smart traffic, and the security of its network is very important. Mainstream VPN technologies such as IPSEC VPN, L2TP VPN, GRE, etc. are already supported. In addition, in actual deployment, the IP address for 4G/5G uplink is allocated by the operator, which will affect the accessibility of the entire network equipment maintenance. After deploying VPN, it is very convenient to plan the IP address of the entire network.
UPS Remote Monitoring and Management
As the core component of Edge Span U1000-LTEP outdoor UPS for CCTV, remote monitoring and early warning of UPS working status are very important. Edge Span U1000 LTEP has a built-in core edge control unit, which can monitor the UPS status such as input voltage, input current, operating power, UPS temperature, PFC voltage, output voltage, output current, battery voltage, battery current, output power, and other important operating parameters, and reflect them to the software platform so that customers can monitor UPS operation in real-time and view historical operating status.
Battery Management System
The life and operation of the battery are also very important for the operation of the UPS for CCTV system, especially when there are a large number of sites and power outages are very frequent. After 5-10 years of site deployment, it is inevitable that some batteries will need to be replaced because they have exceeded the usage limit. At this time, if there is a battery management system in the UPS for CCTV camera, its status can be remotely monitored to understand the number of charge and discharge cycles to determine the maintenance plan. The built-in BMS of Edge Span U1000-LTEP outdoor UPS for CCTV can provide you with various information such as battery voltage, current, power, power, number of cycles, single cell voltage, cell voltage balance, etc. to help you understand its operation status through our software platform at the maintenance center.
Envrionment Management
The deployment environment of Edge Span U1000-LTEP outdoor UPS for CCTV is relatively complex, so Edge Span has built-in temperature and humidity sensors that can synchronize real-time conditions to the software platform.
POE Switch Management and Control
As a POE UPS, Edge Span U1000 LTEP has very comprehensive POE management function.The POE switch board embedded in the system will be managed by our software platform. The port status can be remotely managed through the software platform. The POE port can be remotely controlled to shut down and restart. Based on this function, the CCTV system can be restarted remotely to solve the camera freeze problem in most cases.
Third Party Software Platform Integration
Although Edgeware has its own software platform, customers often have their own considerations for the management of the entire network and have their own management system or OSS. Edge Span U1000 LTEP backup power supply is only part of customer network.Therefore, Edge Span can also provide services that are integrated into your third-party platform.
PRTG Software Platform
https://www.paessler.com/
Thingsboard Software Platform
https://thingsboard.io/
Customers have various ways of managing Edge Span U1000 LTEP, so we also provide MQTT and SNMP protocols to connect with customers’ software platforms.
MQTT Inteface Report
SNMP Interface Report
Customization Development
We know that the scenarios faced by Edge Span U1000-LTEP outdoor UPS for CCTV are very diverse, and it is impossible for a fixed model to meet all needs. Edgeware is happy to provide customers with customized services so that our products can accurately meet customer scenarios and achieve one-stop deployment.
Specifications
Edge Span U1000-LTEP outdoor UPS for CCTV Specification | |
Dimension | W*H*D 371mm*450mm*234mm |
Weight | 24kg(with all system） |
Material | Aluminum |
Ingress Protection | IP65 |
Heat Dissipation | No fan design, natural heat dissipation |
System Operating Temperature | -20~+75°C, 5%~90% RH Non condensing |
DC-UPS | Rated Power 300W Input 110V/220V 50/60Hz Output 42.00-58.00VDC |
Battery | 48V15AH Lithium Battery with BMS(720Wh) |
Surge Suppression | 20KA |
Protection | Remote control power on and off from Edgeware convergence platform 20A 110v/220v Leakage Protection Overvoltage Protection Under Voltage Protection Overcurrent Protection Short circuit Protection Lightning Protection |
Network Module: | Industrial Layer 2 POE Switch GE Downlink: 8*10/100/1000M Base-T ports GE Uplink : 2*10/100/1000M Base-X or Base T ports Industrial Layer 3 Router GE Downlink: 4*10/100/1000M Base-T ports GE Uplink : 1*10/100/1000M Base-X or Base T ports |
PoE: | 6*POE/POE+ Ports with 30W max power per port 2*POE++ Ports with 110W max power per port Total power should not be bigger 400W |
Output Power | DC12V DC48 can be customized based on requirement |
Output and Input Signal | External Sensor Integration can be customized based on requirement |
System Monitoring and Management | Work with Edgeware Convergence software platform to perform system monitoring and management |
Environment Monitoring | System temperature, humidity. |
UPS Status Monitoring | Input Voltage, Output Voltage Input/Output Power，Rated Power Battery Charge/Discharge Current Input Current, Load Current Normal, Power Grid Off, Fault |
AC Power Input Monitoring | Remote Control Failure Status Voltage Current Undervoltage Overvoltage Overcurrent Current leakage |
Battery Status Monitoring | Battery voltage , current, remaining capacity, temperature Battery working status, battery charge and discharge current Battery health estimation( Battery life time estimation ) |
External Light Control | External light controlt |
Typical Application Scenario | cctv cabinet,solar cabinet, solar termination cabinet, Solar Controller enclosure, video surveillance cabinet, IoT Cabinet, IoT device enclosure, IoT enclosures Smart City, Industrial Control, video surveillance, Telecom |
Layer2 POE Switch Specification |
|
Network Module Switching Capacity | 128Gbps |
MAC | 8K |
Network Module Protocol Supported | 4K VLAN based on port, IEEE802.1q VLAN based on the protocol, VLAN based on MAC QinQ configuration, Port configuration of Access, Trunk, Hybrid LACP, Static aggregation, Max 3 aggregation groups and 8 ports per group. STP (IEEE802.1d),RSTP (IEEE802.1w),MSTP (IEEE802.1s) MLD Snooping v1/v2,Multicast VLAN IGMP Snooping v1/v2, Max 1024 multicast groups, Fast log out Bidirectional data mirroring based on port Flow-based Rate Limiting Flow-based Packet Filtering 8*Output queues of each port 802.1p/DSCP priority mapping Diff-Serv QoS,Priority Mark/Remark Queue Scheduling Algorithm (SP, WRR,) Port-based Issuing ACL,ACL based on port and VLAN L2 to L4 packet filtering, matching first 80 bytes message. Provide ACL based on MAC, Destination MAC address, IP Source, Destination IP, IP Protocol Type, TCP/UDP Port, TCP/UDP Port Range, and VLAN, etc IP-MAC-VLAN-Port binding ARP inspection,Anti-DoS attack AAA & RADIUS,MAC learning limit Mac black holes,IP source protection IEEE802.1X & MAC address authentication Broadcast storm control,Backup for host datum SSH 2.0,SSL,Port isolation,ARP message speed limit User hierarchical management and password protection DHCP Client,DHCP Snooping,DHCP Server,DHCP Relay |
Layer3 Router Module Embedded Specifications | |
MOBILE | |
Status | Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID |
SMS | SMS status, SMS configuration, |
Black/White list | Operator black/white list |
Band management | Band lock, Used band status display |
APN | Auto APN |
Bridge | Direct connection (bridge) between mobile ISP and device on LAN |
Passthrough | Router assigns its mobile WAN IP address to another device on LAN |
Dual PDN | Possibility to use different PDNs for dual network access and services (not available in standard FW) |
NETWORK | |
Network protocols | TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPnP, SSH, DHCP, Telnet client, SNMP |
Connection monitoring | TCP-Ping Reboot, Periodic Reboot, LCP and ICMP for link inspection |
Firewall | Port forward, traffic rules, custom rules |
DHCP | Static and dynamic IP allocation, DHCP Relay |
QoS | Speed control of physical interface: WAN, LAN, Modem |
DDNS | 7 service providers, others can be configured manually |
Network backup | VRRP, Mobile, Wired and each of which can be used as backup, using automatic Failover |
SECURITY
Authentication | Pre-shared key, digital certificates, X.509 certificates |
Firewall | Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T |
Attack prevention | DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, NULL flags, FIN scan attacks) |
VLAN | Port and tag based VLAN separation |
Mobile quota control | Set up custom data limits for the SIM card |
WEB filter | Blacklist for blocking out unwanted websites, whitelist for specifying allowed sites only |
Access control | Flexible access control of TCP, UDP, ICMP packets, MAC address filter. |
OpenVPN | Multiple clients and server can be running simultaneously, 12 encryption methods |
OpenVPN Encryption | DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC |
IPsec | IKEv1, IKEv2, supports up to 4 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256) |
GRE | GRE tunnel |
PPTP, L2TP | Client/Server services can run simultaneously |
MONITORING & MANAGEMENT
WEB UI | HTTP/HTTPS, status, configuration, FW update, CLI ,troubleshoot, event log, system log, kernel log |
SSH | SSH (v1, v2) |
SMS | SMS status, SMS configuration, send/read SMS via HTTP POST/GET |
SNMP | SNMP (v1, v2, v3), SNMP trap |
