Edge Span U60 LSP-7 All in One CCTV Power Supply

Edge Span U60 LSP-7 All in One CCTV Camera Power Supply

300W DC UPS, POE Switch and Battery All in One Outdoor System

Edge Span U60-LSP-7 CCTV Power Supply Overview

1.Edge Span U60 LSP-7 CCTV Camera Power Supply Dimension

Edge Span U60-LSP-7 CCTV Power Supply Dimension

2.Edge Span U60 LSP-7 Application

Typical Scenario for Edge Span U60-LSP-7 CCTV Power Supply

Edge Span U60 LSP-7 CCTV Power Supply is an outdoor maintenance-free all-in-one outdoor enclosure that integrates communications, UPS, lightning protection, and POE switch. The product is specially optimized according to the pain points of CCTV Camera outdoor deployment to achieve the following main functions:

  • Industrial grade layer2 POE+/POE++ switch(5 Ports 802.3at 30W, 2 Ports 802.3bt 110W)
  • Industrial grade 300W DC-UPS 
  • 48V10Ah lithium battery(2-4 hours system autonomy)
  • Software system for remote management and monitoring
  • Surge protection design 
  • Full aluminum IP65 enclosure for whole system natural heat dissipation ability. 

3.Edge Span U60 LSP-7 CCTV Power Supply Port Configuration

Port Configuration of Edge Span U60-LSP-7 CCTV Power Supply

4.System Main Funciton Units

Edge Span U60-LSP-7 Main Function Units

5.Main Features

5.1 UPS Remote Monitoring and Managemenet

Edge Span U60-LSP-7 UPS Remote Monitoring and Management

UPS system is a critical unit for CCTV power supply. Edge Span’s built-in UPS can be remotely monitored and managed by Edgeware’s Convergence software platform, allowing users to easily implement remote operation and maintenance.

5.2 Battery Management System(BMS)

Edge Span U60 LSP-7 Battery Management System

Outdoor CCTV power supply is usually deployed in remote outdoor areas, and the maintenance cost is relatively high. The battery status and service life will largely cause on-site maintenance and repair. Therefore, the built-in battery of Edge Span is equipped with Battery Management System (BMS). BMS collects key parameters such as battery voltage, current, capacity, number of cycles, etc. and synchronizes them to the software platform for remote management and maintenance by operation and maintenance engineers.

5.3 Environment Monitoring in CCTV Power Supply Enclosure

Edge Span U60-LSP-7 in Enclosure Environment Management

The deployment environment of outdoor CCTV Camera power supply is relatively complex, so Edge Span has built-in temperature and humidity sensors that can synchronize real-time conditions to the software platform.

5.4 POE Remote Reset

Remote POE Reset

Edge Span has built-in POE remote reset function to help customers remotely restart CCTV Camera. No need to go to the site, just operate on the software platform to restart the corresponding CCTV camera.

6.Edge Span U60-LSP-7 CCTV Power Supply Specifications

Edge Span U60-LSP All in One CCTV Power Supply Specification


W*H*D 295mm*355mm*150mm


12.5kg(with all system)



Ingress Protection


Heat Dissipation

No fan design, natural heat dissipation

System Operating Temperature

-20~+75°C, 5%~90% RH Non condensing


Rated Power 300W

Input 110V/220V 50/60Hz Output 42.00-58.00VDC


48V10AH Lithium Battery with BMS

Surge Suppression



Remote control power on and off from Edgeware convergence platform

10A 110v/220v

Leakage Protection

Overvoltage Protection

Under Voltage Protection

Overcurrent Protection

Short circuit Protection

Lightning Protection

Network Module:

GE Downlink: 7*10/100/1000M Base-T ports

GE Uplink : 2 *10/100/1000M Base-X or Base T port

Layer 2 POE switch module manageable


5*POE/POE+ Ports with 150W max power 

2*POE++ 802.3bt with 110W

Total power should not be bigger 250W

Output Power

DC12V DC48 can be customized based on requirement

Output and Input Signal

External Sensor Integration can be customized based on requirement

System Monitoring and Management

Work with Edgeware Convergence software platform to perform system monitoring and management

Environment Monitoring

System temperature, humidity.

Box open and close status

UPS Status Monitoring

Input Voltage, Output Voltage

Input/Output Power,Rated Power

Battery Charge/Discharge Current

Input Current, Load Current

Normal, Power Grid Off, Fault

AC Power Input Monitoring

Remote Control

Failure Status






Current leakage

Battery Status Monitoring

Battery voltage , current, remaining capacity, temperature

Battery working status, battery charge and discharge current

Battery health estimation( Battery life time estimation )

External Light Control

External light controlt

Typical Application Scenario

cctv cabinet,solar cabinet, solar termination cabinet, Solar Controller enclosure, video surveillance cabinet, IoT Cabinet, IoT device enclosure, IoT enclosures

Smart City, Industrial Control, video surveillance, Telecom

Network Module Switching Capacity




Network Module Protocol Supported

4K VLAN based on port, IEEE802.1q VLAN based on the protocol, VLAN based on MAC QinQ configuration, Port configuration of Access, Trunk, Hybrid

LACP, Static aggregation, Max 3 aggregation groups and 8 ports per group.

STP (IEEE802.1d),RSTP (IEEE802.1w),MSTP (IEEE802.1s)

MLD Snooping v1/v2,Multicast VLAN IGMP Snooping v1/v2, Max 1024 multicast groups, Fast log out

Bidirectional data mirroring based on port

Flow-based Rate Limiting Flow-based Packet Filtering 8*Output queues of each port 802.1p/DSCP priority mapping Diff-Serv QoS,Priority Mark/Remark Queue Scheduling Algorithm (SP, WRR,)

Port-based Issuing ACL,ACL based on port and VLAN L2 to L4 packet filtering, matching first 80 bytes message. Provide ACL based on MAC, Destination MAC address, IP Source, Destination IP, IP Protocol Type, TCP/UDP Port, TCP/UDP Port Range, and VLAN, etc

IP-MAC-VLAN-Port binding ARP inspection,Anti-DoS attack AAA & RADIUS,MAC learning limit Mac black holes,IP source protection IEEE802.1X & MAC address authentication Broadcast storm control,Backup for host datum

SSH 2.0,SSL,Port isolation,ARP message speed limit User hierarchical management and password protection

DHCP Client,DHCP Snooping,DHCP Server,DHCP Relay