Edgeware Solar Hybrid Power System 24KW

Product Overview

24KW Hybrid System sub-rack power supply, 13U height compact design to meet critical application needs of fiber and microwave transmission, access device, switch. The system maximum power is 24KW, with AC/DC/battery/load MCBs. The cables are front accessing with MCB and busbar.

Specifications

Type		24KW Hybrid System
System	Dimension	19 Inch(W)350.0(D)13U(H)
	Weight	≤40kg (without rectifiers)
	Cooling mode	Natural cooling
	Installation mode	Installed on 19-inch rack or inside the cabinet
	Maintenance mode	Front maintenance, support module grade change
	Protection level	IP20
INPUT Distribution		AC	DC	DC
	Input mode	380VAC three-phase	120VDC to 340VDC	120VDC to 340VDC
	Input capacity	1×100A/3P	4×25A/2P	1×63A/2P
	Input frequency	45~66Hz, rated value: 50Hz/60Hz	/	/
	SPD	20kA/40kA, 8/20μs
OUTPUT Distribution	Output voltage	-42~-58VDC, rated value: -53.5VDC	-42~-58VDC, rated value: -54.5VDC	-42~-58VDC, rated value: -54.0VDC
	Maximum capacity	24kW(Rectifier), 12KW(MPPT)，6KW(Wind)
	Battery breakers	3×250(125A/3P)
	Load breakers	LVLD:2×125A/1P, 1×16A/1P,1 reserve position LVBD:2×125A/1P, 2×6A/1P
	SPD	20kA/40kA, 8/20μs
Module		Rectifier module	MPPT module	Wind module
	Input voltage	85VAC～300VAC, rated 220VAC	120VDC to 425VDC, rated 340VDC	120VDC to 340VDC, rated 240VDC
	Efficiency	≥96%	≥96%	≥96%
	Rated power	3000W(176~300VAC)	3000W(200~425VDC)	3000W(200~340VDC)
	Working temperature	-40℃~+75℃(fully output below 50℃)
	Dimension	106.5mm(W)×286mm(D)×41.5mm(1U/H)
	Weight	≤2kg
	Power factor	≥0.99	/
	THD	≤5%	/
Controller	Signal input	4 AI(3 Battery temp., ambient temp) ,7 DI(SPD+ 6 common DI)
	Alarm output	6 dry contact
	Communication port	RS485, SNMP
	Display mode	LCD
Environment	Operating temperature	-40℃~+75℃
	Storage temperature	-40℃~+75℃
	Operating humidity	5%~95%(non-condensing)
	Altitude	0~3000m(If the altitude is within the range of 2000m to 3000m, the maximum operating temperature decreases by 1℃ as the altitude increases by 200m.)