Solar Power 4G Outdoor CPE-Edge Span S60-LTEP-B

500W Solar Power MPPT, 4G/LTE CPE, POE and Battery All in One Power Node

Product Overview

Edge Span S60-LTE-B is a solar power 4G CPE designed by Edgeware. The difference is that it integrates LTE, battery and solar system inside. It fully reflects the design philosophy of Edgeware All in One. Edge Span S60 is a off-grid system, so people also called Outdoor Off-grid Remote Solar Power System.

Edge Span S60 LTEP-B Solar Power 4G Outdoor CPE is an All in One Power Solution specially designed for outdoor access edges. In many edge access scenarios, it is very difficult to obtain wired networks such as GPON and optical fiber Ethernet. Where there is no optical fiber, there is probably no electricity. It is very difficult to realize service access and backhaul at the edge networks. The design background of Edge Span S60 LTEP-B Solar Power 4G Outdoor CPE is to make the deployment of these scenarios no longer difficult. The product integrates a solar controller, an industrial-grade LTE module with POE function, and a complete machine monitoring module.

Edge Span S60 LTEP Solar Power 4G Outdoor CPE system Ingress protection reaches IP65 level, which is enough to adapt to the complex environment of outdoor deployment.

The Edge Span has complete interfaces, with downlink 3*10/100/1000M Base-T interface (if the monitoring module is not configured, it can reach 4*10/100/1000M Base-T).  All downlink ports have POE/POE+ functions. If customers need POE++, we can also add corresponding modules. At the same time, for industrial control, power control and SCADA system control scenarios, 2*DI, 2*DO, 1*RS232 and 1*RS485 are added. The uplink interface can be configured as 1 10/100/1000M Base-T and 1*10/100/1000M Base-X according to requirements.

In terms of LTE wireless, it has high scalability to adapt to a variety of different scenarios. Customers can choose CAT1 CAT4 CAT6 CAT12 wireless modules of different standards according to their own scenarios. We can also customize antennas with different gains according to your requirements, such as 3dBi, 6dBi, 10dBi and so on.

Edge Span S60 LTEP-B Solar Power 4G Outdoor CPE integrates a 48V20AH lithium battery, and the battery has a powerful BMS management, which is enough to allow you to remotely understand the monitoring status of the battery.


Edge Span S60-LTEP-B Solar Power 4G Outdoor CPE Specification


W*H*D 295mm*355mm*214mm


9.8kg(with all system)



Ingress Protection


Heat Dissipation

No fan design, natural heat dissipation

System Operating Temperature

-20~+75°C, 5%~90% RH Non condensing

Solar Controller

500W DC48V 10A MPPT solar controller with remote control


48V20AH MnNiCo ternary lithium battery with or without BMS

Network and System Surge Suppression

Contact discharge 8KV, air discharge 15KV, port lightning protection common-mode 4KV, differential mode 2KV

Network Module:

GE Downlink: 3*10/100/1000M Base-T ports  ( Can be 4 Ports if monitoring unit is not configured)

GE Uplink : 1*10/100/1000M Base-X  and 1*10/100/1000MBase-T port

1*RS485 1*RS232 2*DI 2*DO

4G LTE Uplink , can be CAT4 , CAT6, CAT12 based on configuration

Industrial LTE router module


Downlink ports support

802, I.3 at/af, max PoE power 90W.  ( Can be 120W 4 ports if monitoring unit is not configured)

802.3 bt 60W POE module optional.

Output Power

DC12V DC48 can be customized based on requirement

System Monitoring and Management

Work with Edgeware Convergence software platform to perform system monitoring and management

Environment Monitoring

System temperature, humidity.

Box open and close status

Solar Monitoring and Control

Solar power generation, usage and battery charge statistics

Solar system working status

Solar system remote turn on/ off based on time scheduling

Battery Status Monitoring

Battery voltage , current, remaining capacity, temperature

Battery working status, battery charge and discharge current

Battery health estimation( Battery life time estimation )

External Light Control

External light control

Typical Application Scenario

Solar LTE all in one system , Industrial control , Electricity control

4G Band

Worldwide band supported

Features Supported


IEEE 802.11b/g/n/ac(When wifi function is configured)

Static IP, DHCP, PPPoE


DHCP Server/Client/Relay, DNS Relay, IPv6

Static Routing, Policy routing, RIP


Modbus TCP (Slave/Master)

Standard TCP/UDP transparent transmission

TCP/UDP agency (LAN Connection DTU)


Radius, TACACS+

NAT, PAT, DMZ, Port Forward IP/Domain/MAC Filter Access Control List (ACL)


LCP, Heartbeat Package link maintenance, ICMP Detection, Self-diagnostic, Auto-recover


Local, Remote Reboot, Scheduled Reboot

Link Protection

WAN Uplink as main, LTE as backup

Typical Applications

Edge Span S60-LTEP-B Solar Power 4G Outdoor CPE is designed for edge access scenarios. In scenarios with no utility power, rapid deployment can be achieved through Edge Span S60-LTEP-B. It is no longer restricted by the mains electricity. At the same time, this product can customize different uplink interfaces according to customer requirements, such as GPON, 10/100/1000M Base-X SFP optical port, or 10/100/1000M Base-T electrical port. As well as LTE uplink with Cat1 Cat4 Cat6 Cat12 these kind of modules.The downstream port can be customized according to the requirements of the GE port, the downstream port supports 802.3 af/at by default. For scenarios that require 802.3 at, we can also add customized modules according to customer needs.

Edge Span is a one-stop product based on the design concept of Edge Ware All in One. The plug and play of the whole machine can greatly help customers to deploy quickly and simply maintain.

Edge Span S60-LTEP-B Solar Power 4G Outdoor CPE Interfaces

Notes: This is one example of the configuration, we can customized based on your requirement.

Edge Span S60-LSP-B Solar Power 4G Outdoor CPE Embed Battery

Edge Span S60 LSP-B Solar Power 4G Outdoor CPE embedded with  48V20AH MnNiCo ternary lithium battery. No need to connect to external battery unit.

Edge Span B60 LSP-B Solar Power 4G Outdoor CPE Embedded Battery Specification




48V20AH MnNiCo ternary lithium battery

Life Cycles

DoD 800 Cycles

System Monitoring 

All Edge Span products can be equipped with a monitoring unit. When you configured this component, the core functional units in Edge Span can be under the management of Edgeware Convergence Software Platform. This function is especially important when deploying in large-scale outdoor sites. It will greatly simplify your daily maintenance and trouble shooting, thereby saving OPEX.

In some scenarios, customers will have some equipment such as sensors or control systems that need to be integrated into our software platform. We can do this by configuring a monitoring unit on Edge Span.


When Edge Span is equipped with a monitoring unit, customers can easily implement remote site maintenance. Different sites can be set to different maintenance groups and assigned to different team to perform specific tasks in real time. Our Convergence Software Platform also has a northbound API interface, which can be opened to the customer’s superior OSS system to facilitate customer integration of the entire network management.

Solar Energy Statistics

Solar Energy Statistics 

  • Solar Power Generation statistics
  • Battery status statistics
  • Power load usage
  • All key parts and parameters monitoring.
  • To help customer manage the site remotely.

Solar Controller Remote Turn On and Off

  • Averagely 70-80% battery capacity is prepared for the system operating after sunset.
  • But in some scenario, we don’t need to keep system running during the night.
  • With Edgeware Convergence Platform, customer can schedule the switch on and off the system power based on time.
  • Thus to use the battery more efficient to reduce the battery capacity configuration.

External Devices Power Providing and Monitoring

Legacy Camera Power Providing

  • Legacy cameras can not support POE functions. To upgrade a existing site, we need to provide power to them using legacy way.
  • Edge Span provides DC12V or DC24V and DC48V.

IoT Devices , Sensors, Alarm, Speakers and Light Power Providing

  • Edge Span can be power source for all the devices on the pole.
  • Edgeware can provide customizations to the power cable to adapt customer devices.
  • DC12V or DC24V and DC48V is available.

External Devices Control

  • Edge Span provides an external RS485. In some cases , Edgeware could provide software customization to help customer integrate external sensors.

Camera Status Monitoring

  • Edge Span can help customer to monitor the camera online status that is connected to Edge Span.
  • Thus one site operation can be unified.

Comprehensive Structure Design for Harsh Environment

High Efficient Natural Heat Dissipation with Aluminum Material

  • No FAN design, improve system MTBF.
  • High efficient aluminum material to guarantee high efficient heat dissipation.

Whole system attached to the aluminum case to make sure key parts in appropriate temperature

Full Sealed Design with IP67 Ingress Protection

  • Full sealed system for better water-proof performance.
  • Full sealed system improve system MTBF and outdoor adaptability.
  • Raining season, high humidity will not affect the system anymore.

Full Aluminum for 100% Rust-Proof

  • Full aluminum material constructed, fully rust-proof .
  • Designed especially for the complex environment in Latin America.
  • Targeting 10 years life time outdoor deployment.

Solid Structure

  • Enhanced structure designed for outdoor usage.
  • Difficult to destroy the system. Good for complex environment deployment such as jungle , desert and national boarder.

Highly Integrated System

  • Small but complete functions
  • Light and solid , easy installation.
Share on facebook
Share on twitter
Share on linkedin
Share on whatsapp
Share on email
Share on print