Solar Power Supply for IP Camera- Edge Span S60-LSP-3
MPPT 500W Solar Controller ,2640Wh Lithium Battery,Layer 2 POE Switch All in One System
Solar Power Supply for IP Camera- Edge Span S60-LSP-3
Edge Span S60-LSP-3 Solar Power Supply for IP Camera is an all in one outdoor smart node designed specifically for solar power supply for IP camera scenarios. Different from general CCTV outdoor cabinet, it adopts a highly integrated design method to integrate solar system, battery, layer 2 POE switch, monitoring and management into a completely rust-proof IP65 enclosure to facilitate the one-stop deployment of rural area CCTV cameras. At the same time, Edge Span S60-LSP-3 can also be used in rural Internet connection coverage scenarios to provide solar power and network aggregation for wireless P2P/P2MP antenna and WIFI system.
Features of Edge Span S60-LSP-3
Integrated with Solar and Battery
Edge Span S60-LSP-3 Solar Power Supply for IP Camera is designed for CCTV camera deployment in rural areas. To address the problem of difficult access to electricity in rural areas, the system has a built-in MPPT solar controller and lithium battery. The battery capacity reaches 2640Wh, and the camera’s system runtime reaches more than 48 hours.
Pre-Integration for Easy Deployment
Solar Power Supply for IP Camera is designed to be deployed in rural areas, where the installation and commissioning costs are much higher than those in downtown areas. Therefore, the traditional CCTV outdoor cabinet patchwork solution is not suitable for this scenario. Edge Span S60 is designed to be highly integrated, plug and play. This eliminates the need for wiring integration between different components at the site, greatly reducing the annual site installation costs.
IP65/NEMA4X Design
In the scenario where CCTV needs to use solar power, the external environment in which the equipment is installed is bound to be more complex. In order to meet this challenge, Edge Span S60-LSP-3 is designed with IP65 ingress protection, thereby protecting the core components of the system from external factors such as humidity, temperature, condensation, etc.
Outdoor Optimized Rugged Design
The Edge Span S60-LSP-3 has a rugged design for the entire system housing, which allows for long-term stable operation in outdoor environments and is particularly suitable for solar power supply for IP Camera scenarios.
No Rust for Long Term Operation
The entire Edge Span S60-LSP-7 solar power supply for cctv camera is built in a cast aluminum housing. Due to the advantages of the cast aluminum housing itself, the entire system is rust-proof. It is particularly suitable for deployment in extreme areas, such as forests, seaside, and high humidity areas.
Surge Protection
Another major challenge in the outdoor environment is surge protection. To address this challenge, the Edge Span S60-LSP-7 has a complete grounding design. At the same time, a complete lightning protection system is designed for all device interfaces. The signal interface has a 6kV level lightning protection, while the power interface has a 20Ka level lightning protection.
Complete POE+/POE++ Function
The typical configuration of Edge Span S60-LSP-3 provides 3 802.3at (POE+) interfaces so that customers can power various WIFI APs, CCTV cameras and other devices at outdoor sites. For some special scenarios, 802.3bt (POE++) interfaces can be provided according to customer needs. We will recalculate the power budget of the entire solar battery enclosure based on the customer’s power so as to determine the final configuration plan with the customer.
Remote Monitoring and Management
When a site is working outdoors and is also a solar power based site, there are many things that the operation and maintenance personnel need to pay attention to. For example, the site is overcast and rainy for many days, causing the solar cells to run out, or the core equipment of the site is faulty. Edgeware provides a complete remote monitoring and management solution, allowing customers to know the overall operation and statistics of the site at the NOC.
Main Application Sceanrios
- Wireless Relay Node
In the Solar Power Supply for IP Camera scenario, the CCTV camera is far away from the headquarters NVR. Another possibility is that the CCTV camera is far away from the network that can be used to transmit back to the headquarters NVR server. In this case, wireless P2P/P2MP devices are generally used for backhaul. At this time, a series of wireless relay nodes need to be established. These wireless relay nodes are usually two or three wireless antennas back to back to achieve the extension of the transmission distance. Most wireless P2P/P2MP devices can be powered by POE.
- Wireless Access Node
CCTV cameras are usually located in the access nodes of the entire network architecture. These access nodes are connected to wireless P2P/P2MP devices through the upstream interface and CCTV cameras through the downstream interface. Because the wirelsss devices connected to the upstream interface require POE power supply, the solar power supply here needs to provide WAN interface POE output capability, and the LAN interface must also support POE to power the CCTV camera.
Edge Span S60-LSP-3 can support these two scenarios well, so one model can solve all scenarios of solar power supply for IP camera.
Edge Span S60-LSP-3 General Specification
- IP65/NEMA4 Waterproof
- W*H*D 295mm*355mm*214mm
- 21.5kg
- Aluminum Cast Enclosure Rust-Proof
- Operating Temperature:-20~+55°C
- Working Humidity:5%~90%
- Power Surge Protection:20Ka
- Layer 2 POE Switch Module Embedded
- 128Gbps Switch Capacity
- 1*1000Base-X WAN Ports
- 3*1000Base-T LAN Ports
- 1 WAN Port Support 802.3at to Power Uplink Wireless/Microwave Link Devices
- 3 LAN Ports 802.3at, Can Add One Port 802.3bt
- 500W MPPT Solar Controller
- 2640Wh Lithium Battery(48V55AH)
- Thingsboard Support Optional
- Node-Red Optional
Dimension and Weight
Edge Span S60-LSP-3 Security Camera Solar Power Supply dimension and weight as followings:
- The weight of the whole system is 22kg (with battery installed)
- Dimension of the whole system: 351mm*295.5mm*214mm (W*H*D)
Installation of Edge Span LSP-3 Solar Power Supply for IP Camera
Pole Mounting Installation
Edge Span S60-LSP-3 supports pole mounting installation
Wall Mounting Installation
Edge Span S60-LSP-3 supports wall mounting installation
Application of UPS for CCTV System
The solar and battery configuration of the Edge Span LSP-3 Solar Power Supply for IP Camera allows the edge IoT solution to be easily deployed in any environment. This allows various industrial controls, smart agriculture, CCTV cameras, WIFI APs, etc. to be deployed in remote areas without being restricted by electricity.
Solar Power Generation and Usage Statistics
Edge Span LSP-3 Solar Power Supply for IP Camera has a built-in solar power statistics function, which can record the solar energy generation and usage data every hour, day, week, and year on the software platform and the local UI of the device. This allows customers to have a more detailed understanding of the site’s operation and becomes the data basis for expansion and future site construction.
Time-Scheduled Load On/Off
Edge Span LSP-3 Solar Power Supply for IP Camera can schedule the opening and closing of different POE ports based on time. For example, the WIFI AP and some unimportant sensors can be turned off at night to save battery power at night. This ensures that important devices can have longer system autonomy time.
Conditional Load On/Off
Edge Span LSP-3 Solar Power Supply for IP Camera can turn on and off different loads according to preset conditions. For example, when the remaining battery capacity is 40%, non-important loads are turned off, leaving only important loads running. This ensures that the ultimate function of the entire system can extend its battery operation time as much as possible without solar energy.
Solar Controller State Monitoring
When the solar battery enclosure is deployed outdoors, controlling the operating status of the solar controller is very helpful for the operation and maintenance of the entire network. Problems can be diagnosed remotely so that on-site repair and maintenance can be completed faster and better when needed. Edge Span’s built-in solar controller can be remotely monitored and managed by Edgeware’s Convergence software platform, allowing users to easily implement remote operation and maintenance.
Battery Management System
The life and operation of the battery are also very important for the operation of edge site system, especially when there are a large number of sites and power outages are very frequent. After 5-10 years of site deployment, it is inevitable that some batteries will need to be replaced because they have exceeded the usage limit. The built-in BMS of Edge Span S60 can provide you with various information such as battery voltage, current, power, power, number of cycles, single cell voltage, cell voltage balance, etc. to help you understand its operation status through our software platform at the maintenance center.
Edge Span S60-5GP can be designed for the integration of IoT sensors and devices. Edgeware has a complete portfolio of IoT devices for customers to choose from. Third-party IoT devices of customers can also be customized and integrated based on the programmable edge computing capabilities of Edge Span S60-5GP. Thus, a one-stop landing of sensors, edge sites, and software is formed.
Edge Span S60-5GP supports mainstream VPN technologies, greatly simplifying IP planning during network deployment. At the same time, it also greatly increases the security of site data for sites with high data security requirements.
Envrionment Management
The deployment environment of solar for Edge Span is relatively complex, so Edge Span has built-in temperature and humidity sensors that can synchronize real-time conditions to the software platform.
POE Switch Management and Control
Edge Span LSP-3 Solar Power Supply for IP Camera POE ports can be remotely monitored by software for real-time POE power consumption and current. At the same time, for video surveillance scenarios, in many cases when CCTV camera is stuck, you can restart the camera by restarting the corresponding POE port of Edge Span through software.
Third Party Software Platform Integration
Although Edgeware has its own software platform, customers often have their own considerations for the management of the entire network and have their own management system or OSS. UPS for CCTV is only part of customer network.Therefore, Edge Span can also provide services that are integrated into your third-party platform.
PRTG Software Platform
https://www.paessler.com/
Thingsboard Software Platform
https://thingsboard.io/
Customers have various ways of managing Edge Span S60-LSP-3, so we also provide MQTT and SNMP protocols to connect with customers’ software platforms.
Specifications
| Edge Span S60-LSP-3 | |
| Dimension | 351mm*214mm*355.5mm(W*D*H) |
| Enclosure Material | Aluminum Cast Enclosure |
| Ingress Protection | IP65/NEMA4 |
| IK Rating | IK08 |
| Weight | 21.5kg |
| Operating Temperature and Humidity | -20~+55°C/10 % to 95 % non-condensing |
| System Surge Protection | Power Input Surge Protection:20KA Ethernet Port:6KV |
| Solar Input Voltage | 24-50VDC Rated Voltage Input:36VDC |
| Solar Input Current | 10A |
| Solar Max Input Current | 20A |
| Solar Controller Type | MPPT |
| Solar Controller Capacity | 500W |
| System Rated Output Voltage | 54VDC |
| System Output Voltage Range | 42-54VDC |
| System Output Power | 500W |
| System Max Output Current | 10A |
| Battery | 2640Wh Lithium Battery(48V55AH) |
| Battery Management | Embedded with BMS |
| Battery Rated Voltage | 54V |
| Discharging Voltage Cutoff | 42V |
| Max Charging and Discharging Current | 10A |
| Layer2 POE Switch Module | ES33054PFM-BT Manageable Layer 2 POE Switch Module |
| Ethernet Port | 4*10/100/1000Base-T RJ45 ports 1*100/1000Base-X SFP |
| PoE | Downlink ports 1-3 can support IEEE 802.3af/at 30W POE+，port 4 supports 802.3bt 110W. Configure with 300W UPS Max POE Power 240W Configure with 100W UPS Max POE Power 80W(802.3bt Not recommended) |
| Switch Capacity | 128Gbps |
| MAC Table | 4K |
| VLAN | 4K |
| Port Aggregation | LACP |
| Spanning Tree | STP (IEEE802.1d),RSTP (IEEE802.1w),MSTP (IEEE802.1s) |
| Multicast | MLD Snooping v1/v2,Multicast VLAN IGMP Snooping v1/v2, Max 1024 multicast groups, Fast log out |
| QoS | Flow-based Rate Limiting Flow-based Packet Filtering 8*Output queues of each port 802.1p/DSCP priority mapping Diff-Serv QoS,Priority Mark/Remark Queue Scheduling Algorithm (SP, WRR) |
| ACL | Provide ACL based on MAC, Destination MAC address, IP Source, Destination IP, IP Protocol Type, TCP/UDP Port |
| DHCP | DHCP Client,DHCP Snooping,DHCP Server,DHCP Relay |
