UPS for CCTV Camera Edge Span U60 LSP-7
Layer 2 Industrial POE Switch, 300W Industrial UPS and Battery All in One UPS for CCTV Camera
What is UPS for CCTV Camera
UPS for CCTV camera is an uninterruptible power supply specially designed for CCTV Camera. Analyzing the deployment scenarios of CCTV cameras, we can find that most of them are deployed in outdoor environments, and a small part are deployed indoors. Therefore, UPS for CCTV camera should be specially designed and optimized for complex outdoor deployment environments. On the other hand, in large CCTV camera projects, POE (Power Over Ethernet) is used to power CCTV cameras, so UPS for CCTV camera must have POE+ (802.3at) and POE++ (802.3bt) functions. Finally, UPS for CCTV camera is often a site aggregation node for 3-8 cameras. It is a natural layer 2 aggregation node and needs to have a layer 2 switch sometimes perform VLAN and QOS these kind of funtions. The UPS for CCTV camera designed by Edgeware is an all-in-one outdoor UPS system that includes the three functions mentioned above: (1) UPS battery power supply (2) POE+/POE++ (3) Layer 2 Switch
Product Video
Features of UPS for CCTV Camera
Ingress Protection with IP65/NEMA4X
The deployment area of UPS for CCTV camera is very complex. The environment in general urban areas and towns is controllable, but once it is deployed in a high humidity and high salinity environment such as the seaside. Or in a rainforest with high humidity and many flying insects. If the traditional IP55-level outdoor cabinet is used to build the UPS for CCTV camera system, it will not be able to operate stably for a long time in these harsh environments. Therefore, Edgeware insists on designing the UPS for CCTV camera with IP65/NEMA4X ingress protection to ensure that the system can still operate stably in different challenging environments.
Enclosure with Rugged Design
Because the deployment environment of UPS for CCTV is complex, its shell should be designed as rugged design to be able to cope with the challenges and impacts in complex outdoor environments. We designed our system to have an IK08 protection level so that general impacts in the wild will not affect the system.
Rust-Proof
When UPS for CCTV is deployed in a high humidity and rainy environment, the rusting problem will not only affect the appearance of the equipment, but in many cases it can even corrode the entire system. Imagine if it is a traditional IP55 outdoor cabinet, then first of all, the galvanized steel or even stainless steel of the cabinet itself will rust under long-term outdoor deployment. In severe cases, the rust can even damage the cabinet and cause water leakage. In addition, if the system is IP55-level ingress protection, important components in the system will be affected by the high humidity environment and cause short circuits, rust and other problems. Therefore, Edgeware insists that a reliable UPS for CCTV should be Rust-free. Edgeware’s product shell is formed by a cast aluminum shell in one step, and aluminum is naturally rust-proof, thus solving the rusting problem.
Surge Protection
Another major challenge in the outdoor environment is surge protection. UPS for CCTV camera requires a comprehensive design and consideration of the lightning protection and grounding of the entire system. For power input and power output, lightning protection of 20Ka level or above is required. For other signal interfaces, such as Ethernet port and signal port, lightning protection is also required. This allows the entire system to work stably and long-term outdoors.
Natural Heat Dissipation
Natural heat dissipation is very important for UPS for CCTV camera. Because most UPS for CCTV camera systems are deployed outdoors, and the maintenance cost of outdoor environment is very high. UPS systems based on FAN cooling are mechanical parts, which are easy to be damaged, resulting in high maintenance costs at the site. Outdoor UPS systems based on Natural heat dissipation can be maintenance-free for a long time, thus greatly reducing the maintenance cost at the site and saving OPEX.
High Temperature Resistant Long Life Battery
The most vulnerable and core component of the UPS for CCTV camera is the backup battery for camera system. The battery must be resistant to high temperatures and have a long life. Lithium batteries usually meet these characteristics. Lead-acid batteries are not suitable for outdoor high-temperature environments.
POE+/POE++
The best power supply for CCTV cameras is POE, which fully guarantees the reliability of the system and reduces the complexity of the entire network. Outdoor UPS for CCTV cameras must include POE+ (802.3at) and POE++ (802.3bt) functions, so that a single system can power the entire CCTV camera system. High-definition cameras and those with advanced features such as PTZ (Pan-Tilt-Zoom) may demand higher power, making POE++ (802.3bt) an essential feature.
Remote Monitoring and Management
UPS for CCTV cameras are deployed in remote areas, and the maintenance cost is extremely high. When the number of sites increases, it will be difficult to know the working status of the sites without a complete remote monitoring and management software platform. When a site has problems, it will cause multiple site maintenance, greatly increasing the maintenance cost of the entire network.
Edge Span U60 LSP-7 UPS for CCTV Camera
- Industrial level 300W UPS
- Industrial level manageable layer 2 POE Switch(7 ports downlink with 2ports 802.3bt 110W, 5 ports 802.3at 30W, 2 ports uplink can be configured 1000Base-x or 1000Base-T)
- For backup battery for camera system, it configured with lithium battery 10AH(48V)with 480Wh power that can support the whole system to run for 2 hours – 4 hours without power grid(Also ahve 5AH(48V) 240Wh version for cost down request )
- Totally sealed design reaches IP65/NEMA4X ingress protection,dust and water penetration-free system
- Configured with comprehensive system monitoring for in enclosure environment, AC input voltage current power, battery management, UPS management, POE switch management.
- 20Ka surge protection
Dimension and Weight
Edge Span U60 LSP-7 UPS for CCTV camera has balanced heat dissipation and protection, and we have made its design as lightweight as possible so that customers can better install it in outdoor environments. The weight and diameter of the equipment are as follows:
- The weight of the whole system is 12.5kg (with battery installed)
- Dimension of the whole system: 351mm*295.5mm*150mm (W*H*D)
Installation of UPS for CCTV Camera
Pole Mounting Installation
Edge Span U60 outdoor UPS for CCTV camera can support pole mounting installation
Wall Mounting Installation
Edge Span U60 outdoor UPS for CCTV camera can support wall mounting installation
Application of UPS for CCTV Camera
CCTV Camera Site
UPS for CCTV camera can be used as an access site for CCTV cameras to provide power backup and traffic aggregation for 1-8 CCTV cameras including PTZ and bullet cameras. Note that we recommend Edge Span U60 LSP-7 for scenarios with more than 3 CCTV cameras. For less than 3 cameras, it is recommended to use Edge Span series 4-port or less UPS for CCTV camera to make the entire design and procurement more cost-effective.
WIFI AP Access or Aggregation Site
Edge Span U60 UPS for CCTV camera can also provide power and traffic aggregation for WIFI AP. For most WIFI APs, 802.3at and 802.3bt are available.
Smart City Sensor Site
Edge Span U60 UPS for CCTV camera can provide energy and backhaul for smart city sensor sites. If customers need to add special requirements such as DC12V, DC24V, RS485 interface, etc., we can customize it according to the scenario.
Wireless Microwave Site
Edge Span U60 UPS for CCTV camera can provide power backup and traffic aggregation for wireless microwave sites.
Port Configuration
As shown in the figure above, the port configuration of Edge Span U60 LSP-7 UPS for CCTV Camera. There are 7 LAN Port 1000Base-T, of which two ports support 802.3bt 110W and five ports support 802.3at 30W. In addition, the uplink port is generally configured as 2*1000Base-X SFP ports, but it can also be configured as 2*1000 Base-T ports according to customer needs. It can also be configured as one 1000Base-T and one 1000Base-X.
If the customer needs to add POE to the uplink port, it can be customized according to the customer’s needs. We found that there are many scenarios where customers need to add passive POE to the uplink port to match the POE standard requirements of the uplink microwave.
If you need 8 Lan Port POE version, we also have the corresponding model, please refer to the following link:
The system is also equipped with a battery turn off button and a system operation status light. These control components are all waterproof design devices.
Main Function Units
As shown in the figure above, this is the configuration of UPS for CCTV Camera Edge Span LSP-7.
UPS Remote Monitoring and Management
As the core component of UPS for CCTV camera, remote monitoring and early warning of UPS working status are very important. Edge Span U60 LSP-7 has a built-in core edge control unit, which can monitor the UPS status such as input voltage, input current, operating power, UPS temperature, PFC voltage, output voltage, output current, battery voltage, battery current, output power and other important operating parameters, and reflect them to the software platform, so that customers can monitor UPS operation in real time and view historical operating status.
Battery Management System
The life and operation of the battery are also very important for the operation of the UPS for CCTV camera, especially when there are a large number of sites and power outages are very frequent. After 5-10 years of site deployment, it is inevitable that some batteries will need to be replaced because they have exceeded the usage limit. At this time, if there is a battery management system in the UPS for CCTV camera, its status can be remotely monitored to understand the number of charge and discharge cycles to determine the maintenance plan. The built-in BMS of Edge Span U60 can provide you with various information such as battery voltage, current, power, power, number of cycles, single cell voltage, cell voltage balance, etc. to help you understand its operation status through our software platform at the maintenance center.
Envrionment Management
The deployment environment of UPS for CCTV Camera power supply is relatively complex, so Edge Span has built-in temperature and humidity sensors that can synchronize real-time conditions to the software platform.
POE Switch Management and Control
The POE switch board embedded in the system will be managed by our software platform. The port status can be remotely managed through the software platform. The POE port can be remotely controlled to shut down and restart. Based on this function, the CCTV camera can be restarted remotely to solve the camera freeze problem in most cases.
Third Party Software Platform Integration
Although Edgeware has its own software platform, customers often have their own considerations for the management of the entire network and have their own management system or OSS. UPS for CCTV is only part of customer network.Therefore, Edge Span can also provide services that are integrated into your third-party platform.
PRTG Software Platform
https://www.paessler.com/
Thingsboard Software Platform
https://thingsboard.io/
Customers have various ways of managing UPS for CCTV cameras, so we also provide MQTT and SNMP protocols to connect with customers’ software platforms.
MQTT Inteface Report
SNMP Interface Report
Customization Development
We also provide customers with customized development based on Edge Span U60 UPS for CCTV camera, which includes the following services:
(1) Embed the customer’s equipment in Edge Span U60 enclosure, such as replacing the POE switch board with the customer’s POE switch
(2) Increase or decrease the battery capacity
(3) Customize the control logic of the whole machine. For example:
A. When the battery capacity is less than 40%, close several specific POE ports to put the whole machine into power saving mode.
Read a specific sensor, set an alarm, and turn on a certain device.
B. The above are just simple examples, because our company has customized and developed many projects and it is impossible to list them one by one. In short, we are very willing to carry out customized development based on customer scenarios to achieve one-stop delivery.
Specifications
Edge Span U60 LSP-8 All in One Outdoor UPS for CCTV Camera Specifications | |
Dimension | W*H*D 295mm*355mm*150mm |
Weight | 12.5kg(with all system） |
Material | Aluminum |
Ingress Protection | IP65 |
Heat Dissipation | No fan design, natural heat dissipation |
System Operating Temperature | -20~+75°C, 5%~90% RH Non condensing |
DC-UPS | Rated Power 300W Input 110V/220V 50/60Hz Output 42.00-58.00VDC |
Battery | 48V10AH Lithium Battery with BMS |
Surge Suppression | 20KA |
Protection | Remote control power on and off from Edgeware convergence platform 10A 110v/220v Leakage Protection Overvoltage Protection Under Voltage Protection Overcurrent Protection Short circuit Protection Lightning Protection |
Network Module: | GE Downlink: 7*10/100/1000M Base-T ports GE Uplink : 2 *10/100/1000M Base-X or Base T port Layer 2 POE switch module manageable |
PoE: | 6*POE/POE+ Ports with 150W max power 2*POE++ 802.3bt with 110W Total power should not be bigger 250W |
Output Power | DC12V DC48 can be customized based on requirement |
Output and Input Signal | External Sensor Integration can be customized based on requirement |
System Monitoring and Management | Work with Edgeware Convergence software platform to perform system monitoring and management |
Environment Monitoring | System temperature, humidity. Box open and close status |
UPS Status Monitoring | Input Voltage, Output Voltage Input/Output Power，Rated Power Battery Charge/Discharge Current Input Current, Load Current Normal, Power Grid Off, Fault |
AC Power Input Monitoring | Remote Control Failure Status Voltage Current Undervoltage Overvoltage Overcurrent Current leakage |
Battery Status Monitoring | Battery voltage , current, remaining capacity, temperature Battery working status, battery charge and discharge current Battery health estimation( Battery life time estimation ) |
External Light Control | External light controlt |
Typical Application Scenario | cctv cabinet,solar cabinet, solar termination cabinet, Solar Controller enclosure, video surveillance cabinet, IoT Cabinet, IoT device enclosure, IoT enclosures Smart City, Industrial Control, video surveillance, Telecom |
Network Module Switching Capacity | 128Gbps |
MAC | 8K |
Network Module Protocol Supported | 4K VLAN based on port, IEEE802.1q VLAN based on the protocol, VLAN based on MAC QinQ configuration, Port configuration of Access, Trunk, Hybrid LACP, Static aggregation, Max 3 aggregation groups and 8 ports per group. STP (IEEE802.1d),RSTP (IEEE802.1w),MSTP (IEEE802.1s) MLD Snooping v1/v2,Multicast VLAN IGMP Snooping v1/v2, Max 1024 multicast groups, Fast log out Bidirectional data mirroring based on port Flow-based Rate Limiting Flow-based Packet Filtering 8*Output queues of each port 802.1p/DSCP priority mapping Diff-Serv QoS,Priority Mark/Remark Queue Scheduling Algorithm (SP, WRR,) Port-based Issuing ACL,ACL based on port and VLAN L2 to L4 packet filtering, matching first 80 bytes message. Provide ACL based on MAC, Destination MAC address, IP Source, Destination IP, IP Protocol Type, TCP/UDP Port, TCP/UDP Port Range, and VLAN, etc IP-MAC-VLAN-Port binding ARP inspection,Anti-DoS attack AAA & RADIUS,MAC learning limit Mac black holes,IP source protection IEEE802.1X & MAC address authentication Broadcast storm control,Backup for host datum SSH 2.0,SSL,Port isolation,ARP message speed limit User hierarchical management and password protection DHCP Client,DHCP Snooping,DHCP Server,DHCP Relay |
Categories
- Videos
- Training
- Training
- Terminals
- Telecom Cabinet
- Technical Topics
- Technical Tools
- Technical Articles
- Success Case
- Solution
- Software Platform
- Smart Pole
- Smart Agriculture Solution
- Products
- Product Demonstration
- Power System
- Portfolio
- Portable Power System
- Modular Cabinet
- Library
- IoT Sensors
- IoT Edge Router
- Data Center
- Customized Models
- Blogs
- Blog
- Battery
- Articles
- All in One Power Enclosure
