Why 48V PoE UPS can better match CCTV cabinet outdoor scenario?
Table of Contents
Why 48V PoE UPS can better match CCTV cabinet outdoor scenario?
CCTV cabinet outdoor is widely used in video surveillance related projects. The core system of CCTV cabinet outdoor is its power system. The selection of power system determines the reliability, stability and scalability of this system. 48V POE UPS is a special UPS optimized for video surveillance outdoor scenarios. Its design integrates UPS, battery and POE Switch functions into a whole to achieve the integration of CCTV cabinet outdoor system and one-stop delivery. 48V PoE UPS is the most suitable power system for CCTV cabinet outdoor scenarios, which will greatly simplify and miniaturize the entire system, thereby achieving low-cost and high-quality delivery of CCTV cameras.
48V POE UPS Architecture
The above figure shows the system architecture of 48V PoE UPS. It can be seen that it actually consists of two parts. One part is DC-UPS, which is generally 48V voltage and has a battery inside. The other part is POE switch, which is powered by DC48V. In general, the small system of UPS and POE switch is built by the customer. However, we found that in actual deployment, the small system built by the customer often makes the project commissioning and installation too complicated. This problem is particularly serious when there are a large number of sites and the sites are located in remote areas. Therefore, in the design of Edgeware, the two are combined into a pre-integrated system 48V PoE UPS, and the POE switch, DC-UPS and battery are turned into a factory pre-integrated standard part, so that customers do not need to debug and install the site. Then this pre-integrated 48V PoE UPS is installed in the CCTV cabinet outdoor, so that the entire CCTV cabinet outdoor is fully pre-integrated at the factory, and customers can directly transport it to the site for installation.
CCTV Cabinet Outdoor with 48V POE UPS Embedded
The picture above is Edgeware’s CCTV cabinet outdoor with 48V POE UPS Embedded. Every time we design and manufacture, we will highly integrate it according to the actual requirements of the customer. Its 48 POE UPS is a pre-integrated module, which contains batteries, DC-UPS, POE Switch, monitoring module, power distribution unit, etc. In this way, CCTV cabinet outdoor is not a system that needs to be wired, installed, and debugged at the site. The debugging work has been completed at the factory, and the customer can directly plug and play at the site. Based on this model, we can greatly accelerate the deployment speed of customer video surveillance projects and reduce deployment costs. We also reserve space for customer equipment installation, such as satellite routers, access routers of specific brands, etc. The power can be taken from the power distribution unit of the 48V POE UPS. The system provides multiple options such as DC48V, DC12V, and DC24V. Inverter units can also be configured when necessary.
Related Models
