How to Build a Solution for POE Switch with Battery Backup?
Table of Contents
How to Build a Solution for POE Switch with Battery Backup?
The POE switch on the market is an independent device. It does not carry a battery and therefore does not have the ability to provide power backup for POE devices. The general way to build a POE switch with battery backup is to use a UPS plus a battery. The UPS can power the POE switch to achieve POE switch with battery backup. However, this is not the best solution. This method of building a POE switch with battery backup solution will be more complicated and more suitable for indoor applications. Edgeware provides a more integrated POE switch with battery backup solution.
Highly Integrated POE Switch with Battery Backup Solution
Edgeware has found that most customers have this pain point in their experience of deploying various video surveillance and IoT projects outdoors. They hope that the deployment of outdoor CCTV camera solutions can be simpler and more integrated. It is best to have a small POE switch with battery backup system that highly integrates POE switch, UPS, battery and IP65 outdoor enclosure. This highly integrated small system becomes a plug and play system that can be installed and powered on when deployed, without the need for complex cable connection, testing, commissioning, etc. at the site.
Based on this, Edgeware developed the Edge Span series of products as a POE switch with battery backup product to adapt to customers’ CCTV camera deployment scenarios.
Edgeware POE Switch with Battery Backup Product Series
Edge Span U60-LSP-7 is a typical POE switch with battery backup product. It is an all-in-one smart node that integrates Layer2 POE Switch, UPS, and Battery. The system adopts a small and compact design, which completely revolutionizes the patchwork deployment of traditional outdoor cabinets. Edge Span U60-LSP-7 makes the deployment of scenarios such as Video surveillance, outdoor WIFI, and rural area network coverage more standardized and faster. The system’s enclosure is made entirely of cast aluminum shells, which is completely rust-proof and has ingress protection up to IP65/NEMA4 level, making it very suitable for deployment in harsh environmental areas. The system heat dissipation is based on natural heat dissipation of the cast aluminum shell, and there are no fan components, so that the system can run for a long time without maintenance. The system has 802.3at (POE+) and 802.3bt 110W (POE++) capabilities, and can be widely adapted to different types of POE devices.
Of course, Edge Span U60-LSP-7 is just one of the products in the series. You can choose the product that suits you from the following sections.
Edgeware Related Product Options
Edge Span U60 LSP-7 for 4-8 Cameras Layer 2 Switch Aggregation
Edge Span U60-5GP for 1-3 Cameras Layer3 Aggregation with 4G/5G Backhaul
