What is ups for cctv camera system
Table of Contents
What is ups for cctv camera system?
An uninterruptible power supply (UPS) or uninterruptible power source is a type of continual power system that provides automated backup electric power to a load when the input power source or mains power fails.UPS for CCTV camera system is a UPS specially designed for CCTV camera system. Different from general UPS, CCTV camera system has special requirements for UPS. CCTV camera system is specially optimized according to the requirements of this scenario.
Functions of UPS for CCTV Camera System
UPS for CCTV camera system will be designed differently according to indoor and outdoor scenarios.
Indoor scenario:
Indoor scenario is relatively simple, because it will not be affected by various factors such as complex outdoor environment, rain, strong wind, high humidity air, etc. Indoor scenario UPS for CCTV camera system often uses standard tower UPS or 19 inch rack UPS combined with POE switch. At the same time, lead-acid battery or lithium battery is configured according to the load. In this way, CCTV camera is connected through POE switch, and UPS supplies power to POE switch to build an indoor UPS for CCTV camera system.
Outdoor scenario:
Outdoor scenario is relatively complex, because the system must be waterproof and protected from various high humidity air, high salt air, bad climate and other outdoor environments. At the same time, lightning protection and CCTV camera wiring issues need to be considered in detail in outdoor scenarios. Therefore, the traditional POE switch plus indoor version Tower UPS or POE switch is not suitable. And because outdoor CCTV camera scenes are usually in remote areas, if UPS for CCTV camera system is built in indoor scenarios, the system will be huge and the transportation cost to the station will be too high. At the same time, site integration and installation are too complicated.
Understanding UPS for CCTV Camera System in Outdoor
Edgeware’s UPS for CCTV camera system is designed and developed based on customer needs. We have a variety of mature modules that can be designed into an IP65 enclosure to achieve a highly integrated UPS for CCTV camera system. After the equipment arrives at the site, there is no need to consider integration and complex installation. The interconnection of battery UPS and switches, etc. The entire system is plug and play for rapid deployment.
Edgeware Related Product Options
Edge Span U60 LSP-7 for 4-8 Cameras Layer 2 Switch Aggregation
Edge Span U60-5GP for 1-3 Cameras Layer3 Aggregation with 4G/5G Backhaul
